New Holland 4330V

The New Holland 4330V is a tractor produced by New Holland. It is equipped with a 220 ci 3.6 L engine. The listed engine power is Diesel (listed): 70 hp / 52.2 kW. Transmission: 12 forward and reverse. Operating weight: 3935 to 4122 pounds.

Engine Power

Diesel (listed): 70 hp / 52.2 kW

Fuel & Capacities

11.9 gal 45.0 L

Transmission

12 forward and reverse

Operating Weight

3935 to 4122 pounds

Overview

	1997 - 2000 Orchard/Vineyard tractor

Production
Manufacturer	New Holland
Orchard/Vineyard tractor
Original price was $25,500 in 2000

New Holland 4330V Engine
Iveco 3.6L 4-cyl diesel
Fuel tank	11.9 gal 45.0 L
Engine details ...

New Holland 4330V Transmission
12-speed mechanical shuttle
Transmission details ...

New Holland 4330V Power
Engine	70 hp 52.2 kW
PTO (claimed)	62 hp 46.2 kW

Mechanical
Two- or four-wheel drive
Final drives	inboard planetary
2WD Differential lock	mechanical
4WD Differential lock	electro-hydraulic
Power steering
Mechanical wet disc brakes
Two-post mid-mount ROPS. Cab optional.

Hydraulics
Type	open center
Valves	2
Pump flow	11 gpm 41.6 lpm
Steering flow	8.1 gpm 30.7 lpm
Steering press.	1450 psi 100.0 bar

Tractor hitch
Rear Type	I
Control	position control and lower-link draft sensing
Rear lift	4321 lbs 1960 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	dry disc
Rear PTO Type	540/1000 (1.375)

Dimensions & Tires
2WD Wheelbase	77.1 inches 195 cm
4WD Wheelbase	80.1 inches 203 cm
Weight	3935 to 4122 pounds
Front tire	6.00-16
2WD Rear tire	12.4-28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
ROPS Charging amps	33
Cab Charging amps	65
Battery volts	12

References

New Holland Narrow Tractors 45 and 62 HP published in 1998
North American Buyer's Guide published in 1997, by New Holland

Engine

Engine Detail — 220 ci / 3.6 L Diesel

Manufacturer	Iveco 8045.06
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	220 ci 3.6 L
Bore/Stroke	3.94x4.53 inches 100 x 115 mm
Power	70 hp 52.2 kW
Pre-heating	thermostart
Compression	17:1
Rated RPM	2500
Firing order	1-3-4-2
Starter volts	12
Oil capacity	12.4 qts 11.7 L
Coolant capacity	14.3 qts 13.5 L

Transmission

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	279mm dry disc
Oil capacity	45.1 qts 42.7 L
Four synchronized gears in three ranges with synchronized mechanical shuttle.

Dimensions

New Holland 4330V Tires
2WD Standard tires (ag)	Front: 6.00-16. Rear: 12.4-28
4WD Standard tires (ag)	Front: 7.00-12. Rear: 12.4-28

Dimensions
2WD Wheelbase	77.1 inches 195 cm
4WD Wheelbase	80.1 inches 203 cm
2WD Length	133.5 inches 339 cm
4WD Length	134.1 inches 340 cm
Width	47.1 inches 119 cm
2WD Weight	3935 lbs 1784 kg
4WD Weight	4122 lbs 1869 kg
2WD Clearance (front axle)	15 inches 38 cm
4WD Clearance (front axle)	11.5 inches 29 cm

New Holland 4330V Height
2WD Steering wheel	53.3 inches 135 cm
4WD Steering wheel	52.2 inches 132 cm
2WD Hood	48.5 inches 123 cm
4WD Hood	47.5 inches 120 cm
2WD ROPS	84.6 inches 214 cm
4WD ROPS	83.5 inches 212 cm

Photos

New Holland 4330V tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland 4330V based on its 70 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland 4330V.

Estimated Continuous Field Runtime: 3.3 hrs

Approximately 3.3 hours of continuous field operation at ~75% rated power on a full tank (11.9 gal / 45 L).

Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours