John Deere 5425

The John Deere 5425 is a tractor produced by John Deere. It is equipped with a 278 ci 4.6 L engine. The listed engine power is Diesel (listed): 77 hp / 57.4 kW. Transmission: 9 forward and 3 reverse. Operating weight: 5470 to 5886 pounds.

Engine Power
Diesel (listed): 77 hp / 57.4 kW
Fuel & Capacities
25 gal 94.6 L
Transmission
9 forward and 3 reverse
Operating Weight
5470 to 5886 pounds

Overview

John Deere 5425 tractor photo
2006 - 2012 5025 SeriesUtility tractor 5025 Series Utility tractor
Production
Manufacturer
John Deere
Utility tractor
Built in Saltillo, Mexico
Variants
5425O
orchard
5425HC
high-crop
John Deere 5425 Engine
John Deere 4.6L 4-cyl diesel
Fuel tank
25 gal 94.6 L
Engine details ...
John Deere 5425 Transmission
9-speed gear
Transmission details ...
John Deere 5425 Power
Engine
77 hp 57.4 kW
PTO (claimed)
66 hp 49.2 kW
Mechanical
Two- or four-wheel drive
Power steering
Hydraulic wet disc brakes
Two-post fixed ROPS. Foldable ROPS optional.
Hydraulics
Type
open center
Pressure
2800 psi 193.1 bar
Pump flow
15.9 gpm 60.2 lpm
Steering flow
6.6 gpm 25.0 lpm
Steering press.
1900 psi 131.0 bar
Tractor hitch
Rear Type
II/I
Control
top-link draft sensing
Rear lift (at 24"/610mm)
3374 lbs 1530 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540 (1.375)
Engine RPM
540@2400
540E@1700
Dimensions & Tires
Wheelbase
83.7 inches 212 cm
Weight
5470 to 5886 pounds
Front tire
7.5x16
2WD Rear tire
15.5x38
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
70
Battery CCA
550
Battery volts
12
Battery Group
27F
References
5425 references literature
Tractores Serie 5025 published in 2007, by John Deere

Engine

Engine Detail — 278 ci / 4.6 L Diesel

Manufacturer
John Deere
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
278 ci 4.6 L
Bore/Stroke
4.19x5.00 inches 106 x 127 mm
Emissions
Tier 0
Power
77 hp 57.4 kW
Compression
17.6:1
Rated RPM
2400
Idle RPM
800-2600
Operating RPM
1600-2400
Firing order
1-3-4-2
Starter
electric
Starter volts
12
Oil capacity
9 qts 8.5 L
Coolant capacity
11.4 qts 10.8 L
Intake valve clearance
0.014 inches 0.356 mm
Exhaust valve clearance
0.018 inches 0.457 mm

Transmission

Transmission — 9 forward and 3 reverse gear

Type
gear
Gears
9 forward and 3 reverse
Clutch
279mm dry disc
Oil capacity
40.2 qts 38.0 L
Three gears (1-3) plus reverse (R) in four ranges (A-C). Tractor must be stopped, and clutch used, to shift gear or range.
With 16.9-30 rear tires.
5425  gear speeds

Dimensions

John Deere 5425 Tires
2WD Standard tires (ag)
Front: 7.5x16. Rear: 15.5x38
4WD Standard tires (ag)
Front: 11.2x24. Rear: 15.5x38
Dimensions
Wheelbase
83.7 inches 212 cm
Length
129.7 inches 329 cm
Width
79.1 inches 200 cm
2WD Shipping weight
5470 lbs 2481 kg
4WD Shipping weight
5886 lbs 2669 kg
2WD Clearance (front axle)
15.3 inches 38 cm
4WD Clearance (front axle)
12.5 inches 31 cm
John Deere 5425 Height
2WD Steering wheel
66.5 inches 168 cm
4WD Steering wheel
68.5 inches 173 cm
2WD Hood
62.5 inches 158 cm
4WD Hood
64.5 inches 163 cm
ROPS
98.2 inches 249 cm

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 5425 based on its 77 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5425.

Estimated Continuous Field Runtime: 6.2 hrs

Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (25 gal / 94.6 L).

Estimated 75% Load Fuel Burn~4 gal/hr (15.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 5425 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 5425.

Converted Equivalents:

Horsepower (HP)77 hp
Kilowatts (kW)57.4 kW
Metric Horsepower (PS / CV)78.1 PS

Direct Competitor Comparison

Compare John Deere 5425 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 5425

Engine Power:Diesel (listed): 77 hp / 57.4 kW
★ Baseline Reference
FendtMarket Competitor

Fendt 207 Vario

Engine Power:69.7
Production Years:2010 - 2026
ClaasMarket Competitor

Claas Talos 210

Engine Power:69.7
Production Years:2013 - 2023
Massey FergusonMarket Competitor

Massey Ferguson 175

Engine Power:70
Production Years:1964 - 1975
New HollandMarket Competitor

New Holland 4330V

Engine Power:70
Production Years:1997 - 2000