John Deere 8360RT

The John Deere 8360RT is a tractor produced by John Deere. It is equipped with a 548 ci 9.0 L engine. The listed engine power is Diesel (gross): 360 hp / 268.5 kW. Transmission: John Deere AutoPowr. Drive type: crawler. Operating weight: 39,000 lbs 17690 kg.

Engine Power

Diesel (gross): 360 hp / 268.5 kW

Drive & Traction

crawler

Fuel & Capacities

17.3 gal/hour 65.5 l/hour

Transmission

John Deere AutoPowr

Operating Weight

39,000 lbs 17690 kg

Overview

	2011 - 2013 8R SeriesAgricultural Crawler tractor 8R Series Agricultural Crawler tractor

Production
Manufacturer	John Deere
Agricultural Crawler tractor
Built in Waterloo, Iowa, USA
The John Deere 8360RT was re-tested at Nebraska (Test 2000A) to reflect the new three-point lift capacity for the 2012 model year.

Variants
8360R	wheeled tractor
8360RT	tracked tractor

John Deere 8360RT Engine
John Deere 9.0L 6-cyl diesel
Engine details ...

John Deere 8360RT Transmission
infinitely variable transmission (IVT)
Transmission details ...

John Deere 8360RT Power
Engine (gross)	360 hp 268.5 kW
Engine (max)	396 hp 295.3 kW
PTO (claimed)	288 hp 214.8 kW
Drawbar (tested)	256.60 hp 191.3 kW
PTO (tested)	339.86 hp 253.4 kW
Performance test details ...

Mechanical
Drive	crawler
Steering	electro-hydraulic power
CommandView II cab standard with heat and air-conditioning.

Capacity
Hydraulic system	68.3 gal 258.5 L

Hydraulics
Type	closed center pressure-flow compensated
Capacity	68.3 gal 258.5 L
Pressure	2900 psi 200.0 bar
Rear valves	3 to 5
Pump flow	35 gpm 132.5 lpm
Total flow	60 gpm 227.1 lpm

Tractor hitch
Rear Type	4N/3
Rear lift (at 24"/610mm)	19,300 lbs (2011) 8754 kg
	20,000 lbs (2012-2013) 9072 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000 (1-3/4)

Dimensions & Tracks
Wheelbase	99 inches 251 cm
16-inch tracks
Full dimensions and tracks ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	200
Batteries	2
Battery CCA	925
Battery volts	12

Engine

Engine Detail — 548 ci / 9.0 L Diesel

Manufacturer	John Deere PowerTech PSX
Configuration	dual turbocharged diesel, 6-cylinder 24-valve, liquid-cooled inline
Optional engine Intelligent Power Management (IPM) adds 35 horsepower at rated speed.
Displacement	548 ci 9.0 L
Bore/Stroke	4.66x5.35 inches 118 x 136 mm
Emissions	Interim Tier IV
	Stage IIIB
Emission control	exhaust gas recirculation (EGR)
Rated Power (gross)	360 hp 268.5 kW
Maximum Power (gross)	396 hp 295.3 kW
	409 hp (IPM) 305.0 kW
Air cleaner	dual stage with aspiration
Compression	16:1
Rated RPM	2100
Starter	electric
Starter volts	12
Oil capacity	26.4 qts 25.0 L
Oil change	250 h
	500 h (with JD Plus-50 II)
Coolant capacity	43.3 qts 41.0 L

Transmission

Transmission — John Deere AutoPowr

Transmission	John Deere AutoPowr
Type	infinitely variable transmission (IVT)
Gears	infinite forward and reverse
Oil capacity	273.2 qts 258.6 L

Dimensions

John Deere 8360RT Tracks
Width	16 inches 40 cm
Width	18 inches 45 cm
Width	24 inches 60 cm
Width	25 inches 63 cm
Width	30 inches 76 cm

Dimensions
Wheelbase	99 inches 251 cm
Length	270.9 inches 688 cm
Width	134.6 inches (axle) 341 cm
	174.6 inches (wide axle) 443 cm
Height (cab)	131.3 inches 333 cm
Ballasted weight	39,000 lbs 17690 kg
Max weight	44,000 lbs 19958 kg
Clearance (drawbar)	15.4 inches 39 cm

Tests

Tractor Tests
OECD 2000: diesel IVT crawler
OECD 2000A: diesel IVT crawler

OCED Tractor Test 2000
Diesel IVT crawler September 8 - 27, 2011 Link: OCED Tractor Test 2000 file
PTO performance
Max power	339.86 hp 253.4 kW
Fuel use	18.7 gal/hour 70.8 l/hour
Power at rated engine speed	305.42 hp 227.8 kW
Fuel use	17.2 gal/hour 65.1 l/hour
Power at rated PTO speed	330.90 hp 246.8 kW
Fuel use	18.3 gal/hour 69.3 l/hour
Drawbar performance
Max power	256.60 hp 191.3 kW
Fuel use	17.3 gal/hour 65.5 l/hour
Pull at 7.6 KPH
Max pull	35309 lbs 16016 kg
Pull at 4.4 KPH

OCED Tractor Test 2000A
Diesel IVT crawler September 8 - 27, 2011 Link: OCED Tractor Test 2000A file
PTO performance
Max power	339.86 hp 253.4 kW
Fuel use	18.7 gal/hour 70.8 l/hour
Power at rated engine speed	305.42 hp 227.8 kW
Fuel use	17.2 gal/hour 65.1 l/hour
Power at rated PTO speed	330.90 hp 246.8 kW
Fuel use	18.3 gal/hour 69.3 l/hour
Drawbar performance
Max power	256.60 hp 191.3 kW
Fuel use	17.3 gal/hour 65.5 l/hour
Pull at 7.6 KPH
Max pull	35309 lbs 16016 kg
Pull at 4.4 KPH

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 8360RT based on its 360 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 8360RT.

Estimated Continuous Field Runtime: 0.9 hrs

Approximately 0.9 hours of continuous field operation at ~75% rated power on a full tank (17.3 gal / 65.5 L).

Estimated 75% Load Fuel Burn~18.7 gal/hr (70.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours