Kubota GT-3
The Kubota GT-3 is a tractor produced by Kubota. It is equipped with a 86.8 ci 1.4 L engine. The listed engine power is Diesel (listed): 20.7 hp / 15.4 kW. Transmission: 12 forward and 4 reverse. Operating weight: 1918 to 1973 pounds.
Engine Power
Diesel (listed): 20.7 hp / 15.4 kW
Fuel & Capacities
7.1 gal
26.9 L
Transmission
12 forward and 4 reverse
Operating Weight
1918 to 1973 pounds
Overview
 | 1992 - 2000
GT SeriesCompact Utility tractor
GT Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Kubota |
Compact Utility tractor | |
Variants | |
|---|---|
GT-3 | gear |
GT-3F | hydrostatic |
GT-3J | large tire |
Kubota GT-3 Engine | |
|---|---|
Kubota 1.4L 4-cyl diesel | |
Fuel tank | 7.1 gal
26.9 L |
Engine details ...  | |
Kubota GT-3 Transmission | |
|---|---|
12-speed | |
Transmission details ...  |
Kubota GT-3 Power | |
|---|---|
Engine | 20.7 hp
15.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Two-post folding ROPS. Cab optional. |
Tractor hitch | |
|---|---|
Rear Type | 0 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/750/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 57.1 inches
145 cm |
Weight | 1918 to 1973 pounds |
Front tire | 6-14 |
Rear tire | 8.3-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
Operator's Manual GT-3-5-8 (37560-8182-1) published in 1992 |
Engine
Engine Detail — 86.8 ci / 1.4 L Diesel
Manufacturer | Kubota V1405L |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 86.8 ci
1.4 L |
Bore/Stroke | 2.99x2.76 inches
76 x 70 mm |
Power | 20.7 hp
15.4 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Three gears (1-3), plus reverse, in four ranges (creeper and 1-3). | |
 | |
Dimensions
Kubota GT-3 Tires | |
|---|---|
Standard tires (ag) | Front: 6-14. Rear: 8.3-24 |
GT-3J Optional tires (ag) | Front: 6-14. Rear: 9.5-22 |
Dimensions | |
|---|---|
Wheelbase | 57.1 inches
145 cm |
Length | 111 inches
281 cm |
Width | 45.7 inches
116 cm |
Height (ROPS) | 73.2 inches
185 cm |
Height (cab) | 76.2 inches
193 cm |
ROPS Weight | 1918 lbs
870 kg |
Cab Weight | 1973 lbs
894 kg |
Ground clearance | 12.6 inches
32 cm |
Front tread | 37.4 inches
94 cm |
Rear tread | 36.2/40.9 inches
91/103 cm |
Photos
Kubota GT-3
Kubota GT-3
Kubota GT-3
Kubota GT-3
Kubota GT-3 operator station and controls.
Recommended Implements & Sizing Guide
Engineering recommendations for Kubota GT-3 based on its 20.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Kubota GT-3.
Estimated Continuous Field Runtime: 6.6 hrs
Approximately 6.6 hours of continuous field operation at ~75% rated power on a full tank (7.1 gal / 26.9 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Kubota GT-3 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Kubota GT-3.
Converted Equivalents:
Horsepower (HP)20.7 hp
Kilowatts (kW)15.4 kW
Metric Horsepower (PS / CV)21 PS
Direct Competitor Comparison
Compare Kubota GT-3 against same-era industry alternatives in the same horsepower class.
Current Model
Kubota
Kubota GT-3
Engine Power:Diesel (listed): 20.7 hp / 15.4 kW
★ Baseline Reference
Related models
Kubota A-17
- Power:
- 16.8
- Production years:
- 1988 - 1992
Kubota B1702
- Power:
- 16.8
- Production years:
- 1981 - 1985
Kubota B17X
- Power:
- 16.8
- Production years:
- 2015 - 2025
Kubota GB170
- Power:
- 16.8
- Production years:
- 2002 - 2003
Kubota GB175
- Power:
- 16.8
- Production years:
- 2004 - 2006