Landini 9880HC
The Landini 9880HC is a tractor produced by Landini. It is equipped with a 235.5 ci 3.9 L engine. The listed engine power is Diesel (listed): 93 hp / 69.4 kW. Transmission: Power Flow. Operating weight: 7926 to 8951 pounds.
Engine Power
Diesel (listed): 93 hp / 69.4 kW
Fuel & Capacities
40.2 gal
152.2 L
Transmission
Power Flow
Operating Weight
7926 to 8951 pounds
Overview
 | 1987 - 2000
80 SeriesHigh-Clearance tractor
80 Series
High-Clearance tractor |
|---|
Production | |
|---|---|
Manufacturer | Landini |
High-Clearance tractor | |
Variants | |
|---|---|
9880 | utility |
9880HC | high-crop |
Landini 9880HC Engine | |
|---|---|
Perkins 3.9L 4-cyl diesel | |
Fuel tank | 40.2 gal
152.2 L |
Engine details ...  | |
Landini 9880HC Power | |
|---|---|
Engine | 93 hp
69.4 kW |
PTO (claimed) | 84 hp
62.6 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | hydraulic OptOptional |
pneumatic OptOptional | |
Cab standard with available air-conditioning. | |
Hydraulics | |
|---|---|
Pump flow | 11.7 gpm
44.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 9590 lbs
4350 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@1967 |
1000@1954 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 88.4 inches
224 cm |
4WD Wheelbase | 87.4 inches
221 cm |
Weight | 7926 to 8951 pounds |
Front tire | 9.00-16 |
2WD Rear tire | 13.6R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 45 |
Battery volts | 12 |
References | |
|---|---|
 | |
9880HC published in 1992, by Landini |
Engine
Engine Detail — 235.5 ci / 3.9 L Diesel
Manufacturer | Perkins AT.4-236 |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 235.5 ci
3.9 L |
Bore/Stroke | 3.875x5.00 inches
98 x 127 mm |
Power | 93 hp
69.4 kW |
Air cleaner | dry |
Compression | 15.1:1 |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed synchromesh shuttle | |
24-speed creeper |
Transmission — Power Flow
Transmission | Power Flow |
Type | synchromesh shuttle |
Gears | 12 forward and reverse |
Clutch | 304.8mm dry disc |
With 13.6R38 rear tires. Reverse speeds are 1% faster than forward. | |
 | |
Type | creeper |
Gears | 24 forward and 12 reverse |
Dimensions
Landini 9880HC Tires | |
|---|---|
2WD Standard tires (ag) | Front: 9.00-16. Rear: 13.6R38 |
4WD Standard tires (ag) | Front: 13.6R38. Rear: 13.8R38 |
4WD Optional tires (ag) | Front: 14.9R38. Rear: 14.9R38 |
Dimensions | |
|---|---|
2WD Wheelbase | 88.4 inches
224 cm |
4WD Wheelbase | 87.4 inches
221 cm |
2WD Length | 153 inches
388 cm |
4WD Length | 159.8 inches
405 cm |
2WD Width | 77.2 inches
196 cm |
4WD Width | 79.3 inches
201 cm |
Height (cab) | 113.4 inches
288 cm |
2WD Weight | 7926 lbs
3595 kg |
4WD Weight | 8951 lbs
4060 kg |
Ground clearance | 17.9 inches
45 cm |
2WD Clearance (front axle) | 29.2 inches
74 cm |
4WD Clearance (front axle) | 24.6 inches
62 cm |
2WD Front tread | 63.4 to 80.9 inches
161 to 205 cm |
4WD Front tread | 65.6 to 85.2 inches
166 to 216 cm |
Rear tread | 59.1 to 89.1 inches
150 to 226 cm |
Photos
Landini 9880HC tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Landini 9880HC based on its 93 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Landini 9880HC.
Estimated Continuous Field Runtime: 8.3 hrs
Approximately 8.3 hours of continuous field operation at ~75% rated power on a full tank (40.2 gal / 152.2 L).
Estimated 75% Load Fuel Burn~4.8 gal/hr (18.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Landini 9880HC Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Landini 9880HC.
Converted Equivalents:
Horsepower (HP)93 hp
Kilowatts (kW)69.4 kW
Metric Horsepower (PS / CV)94.3 PS
Direct Competitor Comparison
Compare Landini 9880HC against same-era industry alternatives in the same horsepower class.
Current Model
Landini
Landini 9880HC
Engine Power:Diesel (listed): 93 hp / 69.4 kW
★ Baseline Reference
Related models
Landini 4-080
- Power:
- 75
- Production years:
- 2014 - 2024
Landini Alpine 75
- Power:
- 75
Landini Atlantis 80
- Power:
- 78
- Production years:
- 2001 - 2003
Landini Atlas 80
- Power:
- 78
- Production years:
- 1999 - 2001
Landini Ghibli 80
- Power:
- 78
- Production years:
- 2000 - 2003