Landini Alpine 75

The Landini Alpine 75 is a tractor produced by Landini. It is equipped with a 203 ci 3.3 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: Power Five. Operating weight: 6,710 lbs 3043 kg.

Engine Power

Diesel (listed): 75 hp / 55.9 kW

Fuel & Capacities

24 gal 90.8 L

Transmission

Power Five

Operating Weight

6,710 lbs 3043 kg

Overview

Production
Manufacturer	Landini
Also available in narrower, and lower, GT model

Landini Alpine 75 Engine
Perkins 3.3L 4-cyl diesel
Fuel tank	24 gal 90.8 L
Engine details ...

Landini Alpine 75 Power
Engine	75 hp 55.9 kW
PTO (claimed)	68 hp 50.7 kW

Mechanical
Four-wheel drive
Wet disc brakes
cab optional

Hydraulics
Valves	2
	4 optional
Pump flow	15 gpm 56.8 lpm
Total flow	21.6 gpm 81.8 lpm

Tractor hitch
Rear lift	4,620 lbs 2095 kg
	7,480 lbs 3392 kg

Power Take-off (PTO)
Rear PTO Type	540

Dimensions & Tires
Wheelbase	85.1 inches 216 cm
	83.8 inches 212 cm
Weight	6,710 lbs 3043 kg
Full dimensions and tires ...

Engine

Engine Detail — 203 ci / 3.3 L Diesel

Manufacturer	Perkins 804C-33T
Configuration	turbo diesel, 4-cylinder
Displacement	203 ci 3.3 L
Power	75 hp 55.9 kW
Torque	174 lb-ft 235.9 Nm

Transmission

Transmission options
15-speed
30-speed
60-speed

Transmission — Speed Five

Transmission	Speed Five
Gears	15 forward and reverse

Transmission — Power Five Shuttle

Transmission	Power Five Shuttle
Gears	30 forward and reverse

Transmission — Power Five

Transmission	Power Five
Gears	60 forward and reverse

Dimensions

Landini Alpine 75 Tires

Dimensions
Wheelbase	85.1 inches 216 cm
	83.8 inches 212 cm
Length	158 inches 401 cm
Width	71.5 inches 181 cm
	69 inches 175 cm
Height	95 inches 241 cm
	91.5 inches 232 cm
Weight	6,710 lbs 3043 kg
Ground clearance	15.5 inches 39 cm

Photos

Landini Alpine 75 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Alpine 75 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Alpine 75.

Estimated Continuous Field Runtime: 6.2 hrs

Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (24 gal / 90.8 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours