Landini Landpower 160

The Landini Landpower 160 is a tractor produced by Landini. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 152.9 hp / 114.0 kW. Transmission: Top-Tronic. Operating weight: 24912 lbs 11300 kg.

Engine Power

Diesel (gross): 152.9 hp / 114.0 kW

Fuel & Capacities

74 gal 280.1 L

Transmission

Top-Tronic

Operating Weight

24912 lbs 11300 kg

Overview

	2023 - Landpower SeriesRow-Crop tractor
2023 -
Landpower Series
Row-Crop tractor

Production
Manufacturer	Landini (a part of Argo)
Row-Crop tractor

Landini Landpower 160 Engine
FPT 6.7L 6-cyl diesel
Fuel tank	74 gal 280.1 L
Exhaust fluid (DEF)	10 gal 37.9 L
Engine details ...

Landini Landpower 160 Transmission
54-speed three-speed power shift
Transmission details ...

Landini Landpower 160 Power
Engine (gross)	152.9 hp 114.0 kW
Engine (max)	163.6 hp 122.0 kW

Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Trailer brakes	pneumatic OptOptional
Cab standard with air-conditioning.

Hydraulics
Type	closed-center load sensing
Pump flow	29 gpm 109.8 lpm
Steering flow	10 gpm 37.9 lpm

Tractor hitch
Rear Type	III
Rear lift	18519 lbs 8400 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)

Dimensions & Tires
Wheelbase	113.4 inches 288 cm
Weight	14771 to 24912 pounds
Front tire	540/65R28
Rear tire	650/65R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Landpower published in 2022, by Landini

Engine

Engine Detail — 410.6 ci / 6.7 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	410.6 ci 6.7 L
Bore/Stroke	4.09x5.20 inches 104 x 132 mm
Emissions	Stage V
Rated Power (gross)	152.9 hp 114.0 kW
Maximum Power (gross)	163.6 hp 122.0 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission — Top-Tronic

Transmission	Top-Tronic
Type	three-speed power shift
Gears	54 forward and 18 reverse
Clutch	electro-hydraulic wet disc
Six speeds in three ranges with three-speed power shift and power shuttle. Also available with creeper range that doubles speeds to 108/36.

Dimensions

Landini Landpower 160 Tires
Standard tires (ag)	Front: 540/65R28. Rear: 650/65R38

Dimensions
Wheelbase	113.4 inches 288 cm
Weight	24912 lbs 11300 kg
Shipping weight	14771 lbs 6700 kg

Photos

Landini Landpower 160 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Landpower 160 based on its 152.9 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Landpower 160.

Estimated Continuous Field Runtime: 9.3 hrs

Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (74 gal / 280.1 L).

Estimated 75% Load Fuel Burn~8 gal/hr (30.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours