Landini Powerfarm 105

The Landini Powerfarm 105 is a tractor produced by Landini. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 97 hp / 72.3 kW. Transmission: Top. Operating weight: 7,590 lbs 3442 kg.

Engine Power

Diesel (listed): 97 hp / 72.3 kW

Fuel & Capacities

27.2 gal 103.0 L

Transmission

Top

Operating Weight

7,590 lbs 3442 kg

Overview

	2004 - 2009 Model year 2004-20072007-2009 Powerfarm SeriesUtility tractor Powerfarm Series Utility tractor

Production
Manufacturer	Landini (a part of Argo)
Utility tractor
Also available in high-clearance HC model

Landini Powerfarm 105 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	27.2 gal 103.0 L
Engine details ...

Landini Powerfarm 105 Power
Engine	97 hp 72.3 kW
PTO (claimed)	90 hp 67.1 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
cab optional

Hydraulics
Valves	2
	4 optional
Pump flow	13.8 gpm 52.2 lpm
Total flow	21.6 gpm 81.8 lpm

Tractor hitch
Rear lift	5,700 lbs 2585 kg
	9,570 lbs 4340 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Weight	7,590 lbs 3442 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator

Engine

Engine Detail — 268 ci / 4.4 L Diesel

Manufacturer	Perkins 1104C-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Power	97 hp 72.3 kW
Rated RPM	2200
Torque	268 lb-ft 363.4 Nm
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed
24-speed
32-speed

Transmission — Techno

Transmission	Techno
Gears	12 forward and reverse

Transmission — Techno

Transmission	Techno
Gears	24 forward and 12 reverse

Transmission — Top

Transmission	Top
Gears	32 forward and 16 reverse

Dimensions

Landini Powerfarm 105 Tires

Dimensions
Length	163.8 inches 416 cm
Width	81.2 inches 206 cm
Height	98 inches 248 cm
Weight	7,590 lbs 3442 kg
Ground clearance	16 inches 40 cm

Photos

Landini Powerfarm 105 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Powerfarm 105 based on its 97 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Powerfarm 105.

Estimated Continuous Field Runtime: 5.4 hrs

Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (27.2 gal / 103 L).

Estimated 75% Load Fuel Burn~5 gal/hr (19.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours