Landini Powerfarm 110

The Landini Powerfarm 110 is a tractor produced by Landini. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 102 hp / 76.1 kW. Transmission: Speed Four. Operating weight: 7606 lbs 3450 kg.

Engine Power

Diesel (listed): 102 hp / 76.1 kW

Fuel & Capacities

27 gal 102.2 L

Transmission

Speed Four

Operating Weight

7606 lbs 3450 kg

Overview

	2010 - Powerfarm SeriesUtility tractor
2010 -
Powerfarm Series
Utility tractor

Production
Manufacturer	Landini (a part of Argo)
Utility tractor
Built in Fabbrico, Italy

Landini Powerfarm 110 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	27 gal 102.2 L
Engine details ...

Landini Powerfarm 110 Power
Engine	102 hp 76.1 kW
PTO (claimed)	86.5 hp 64.5 kW

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Two-post ROPS. Cab optional with air-conditioning.

Hydraulics
Valves	2
Pump flow	13.8 gpm 52.2 lpm
Total flow	21.7 gpm 82.1 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Rear lift	5732 lbs 2600 kg
	9590 lbsOptOptional 4350 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750 (1.375)
	540/1000 (1.375)

Dimensions & Tires
2WD Wheelbase	93.1 inches 236 cm
4WD Wheelbase	92.1 inches 233 cm
Weight	7606 lbs 3450 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44TA
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage III
Power	102 hp 76.1 kW
Fuel system	direct injection
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
24-speed mechanical shuttle with creeper
24-speed mechanical shuttle with overdrive

Transmission — Speed Four

Transmission	Speed Four
Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	304.8mm dry disc
Type	mechanical shuttle with creeper
Gears	24 forward and 12 reverse

Transmission — 24 forward and 12 reverse mechanical shuttle with overdrive

Type	mechanical shuttle with overdrive
Gears	24 forward and 12 reverse

Dimensions

Landini Powerfarm 110 Tires

Dimensions
2WD Wheelbase	93.1 inches 236 cm
4WD Wheelbase	92.1 inches 233 cm
Length	163.8 inches 416 cm
Width	81.2 inches*Minimum 206 cm
Height (ROPS)	100.8 inches 256 cm
Height (cab)	100.4 inches 255 cm
Weight	7606 lbs 3450 kg
Ground clearance	17.8 inches 45 cm

Photos

Landini Powerfarm 110 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Powerfarm 110 based on its 102 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Powerfarm 110.

Estimated Continuous Field Runtime: 5.1 hrs

Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (27 gal / 102.2 L).

Estimated 75% Load Fuel Burn~5.3 gal/hr (20.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours