Landini Powerfarm 90

The Landini Powerfarm 90 is a tractor produced by Landini. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 83 hp / 61.9 kW. Transmission: Power Four. Operating weight: 7326 lbs 3323 kg.

Engine Power

Diesel (listed): 83 hp / 61.9 kW

Fuel & Capacities

27 gal 102.2 L

Transmission

Power Four

Operating Weight

7326 lbs 3323 kg

Overview

	2007 - 2020 Model year 2007-20092010-2020 Powerfarm SeriesUtility tractor Powerfarm Series Utility tractor

Production
Manufacturer	Landini (a part of Argo)
Utility tractor
Built in Fabbrico, Italy

Landini Powerfarm 90 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	27 gal 102.2 L
Engine details ...

Landini Powerfarm 90 Power
Engine	83 hp 61.9 kW

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Two-post ROPS. Cab optional with air-conditioning.

Hydraulics
Valves	2
Pump flow	13.7 gpm 51.9 lpm
Total flow	21.6 gpm 81.8 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Rear lift	5732 lbs 2600 kg
	8157 lbsOptOptional 3700 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry disc
	electro-hydraulic wet disc *With Power Four power shuttle transmission.
Rear PTO Type	540/750 (1.375)
	540/1000 (1.375)

Dimensions & Tires
2WD Wheelbase	92.2 inches 234 cm
4WD Wheelbase	91.2 inches 231 cm
Weight	7326 lbs 3323 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Stage III
Power	83 hp 61.9 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
24-speed power shuttle
24-speed shuttle with creeper
24-speed shuttle with overdrive

Transmission — Speed Four

Transmission	Speed Four
Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	279.4mm dry disc

Transmission — Power Four

Transmission	Power Four
Type	power shuttle
Gears	24 forward and 12 reverse
Clutch	hydraulic wet disc
Type	shuttle with creeper
Gears	24 forward and 12 reverse

Transmission — 24 forward and 12 reverse shuttle with overdrive

Type	shuttle with overdrive
Gears	24 forward and 12 reverse

Dimensions

Landini Powerfarm 90 Tires

Dimensions
2WD Wheelbase	92.2 inches 234 cm
4WD Wheelbase	91.2 inches 231 cm
Length	162.8 inches 413 cm
Width	81.2 inches*Minimum 206 cm
Height (cab)	100.4 inches 255 cm
Weight	7326 lbs 3323 kg
Ground clearance	17.8 inches 45 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Powerfarm 90 based on its 83 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Powerfarm 90.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (27 gal / 102.2 L).

Estimated 75% Load Fuel Burn~4.3 gal/hr (16.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours