Landini R9500 Special

The Landini R9500 Special is a tractor produced by Landini. It is equipped with a 354 ci 5.8 L engine. The listed engine power is Engine Detail — 354 ci / 5.8 L (listed): 93 hp / 69.4 kW. Transmission: 12 forward and 4 reverse. Operating weight: 8,170 lbs 3705 kg.

Engine Power

Engine Detail — 354 ci / 5.8 L (listed): 93 hp / 69.4 kW

Fuel & Capacities

25.1 gal 95.0 L

Transmission

12 forward and 4 reverse

Operating Weight

8,170 lbs 3705 kg

Overview

	1973 - 1983

Production
Manufacturer	Landini
Built in Italy

Landini R9500 Special Engine
Perkins 5.8L 6-cyl
Fuel tank	25.1 gal 95.0 L
Engine details ...

Landini R9500 Special Transmission
12-speed
Transmission details ...

Landini R9500 Special Power
Engine	93 hp 69.4 kW
Drawbar (tested)	79.65 hp 59.4 kW
PTO (tested)	97.72 hp 72.9 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Steering	hydrostatic power
Differential dry disc brakes
Cab optional

Hydraulics
Total flow	9.4 gpm 35.6 lpm

Tractor hitch
Rear lift	7,056 lbs 3200 kg

Power Take-off (PTO)
Rear PTO Type	540
	540/1000

Dimensions & Tires
Wheelbase	95.5 inches 242 cm
Weight	8,170 lbs 3705 kg
Front tire	7.50-20
Rear tire	18.4-34
Full dimensions and tires ...

Engine

Engine Detail — 354 ci / 5.8 L

Manufacturer	Perkins A6.354
Configuration	6-cylinder, liquid-cooled
Displacement	354 ci 5.8 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	93 hp 69.4 kW
Air cleaner	paper elements
Compression	16:1
Rated RPM	2100
Starter volts	12

Transmission

Transmission — 12 forward and 4 reverse

Gears

12 forward and 4 reverse

Dimensions

Landini R9500 Special Tires
Ag front	7.50-20
Ag rear	18.4-34
Ag front	13.6-24
Ag rear	18.4-34

Dimensions
Wheelbase	95.5 inches 242 cm
Length	149.6 inches 379 cm
Operating weight	8,170 lbs 3705 kg
Ballasted weight	13,700 lbs 6214 kg

Tests

Nebraska Tractor Test 1107
Diesel 12-speed 2WD September 13 - 19, 1972 Link: Nebraska Tractor Test 1107 file
PTO performance
Power at rated engine speed	97.72 hp 72.9 kW
Fuel use	6.3 gal/hour 23.8 l/hour
Power at rated PTO speed	88.13 hp 65.7 kW
Fuel use	5.4 gal/hour 20.4 l/hour
Drawbar performance
Max power	79.65 hp 59.4 kW
Fuel use	6.1 gal/hour 23.1 l/hour
Max pull	10,216 lbs 4633 kg

Photos

Landini R9500 Special

Recommended Implements & Sizing Guide

Engineering recommendations for Landini R9500 Special based on its 93 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini R9500 Special.

Estimated Continuous Field Runtime: 5.2 hrs

Approximately 5.2 hours of continuous field operation at ~75% rated power on a full tank (25.1 gal / 95 L).

Estimated 75% Load Fuel Burn~4.8 gal/hr (18.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours