Limb LUXS 80
The Limb LUXS 80 is a tractor produced by Limb. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 82 hp / 61.1 kW. Transmission: 24 forward and reverse. Operating weight: 8,774 lbs 3979 kg.
Engine Power
Diesel (listed): 82 hp / 61.1 kW
Fuel & Capacities
22.19 gal
84.0 L
Transmission
24 forward and reverse
Operating Weight
8,774 lbs
3979 kg
Overview
 | 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Production | |
|---|---|
Manufacturer | Limb |
Built in Ptuj, Slovenija | |
Variants | |
|---|---|
Forester | with Igland winch and forestry equipment |
Limb 80 Engine | |
|---|---|
Perkins 4.4L 4-cyl diesel | |
Fuel tank | 22.19 gal
84.0 L |
Engine details ...  | |
Limb 80 Transmission | |
|---|---|
24-speed | |
Transmission details ...  |
Limb 80 Power | |
|---|---|
Engine | 82 hp
61.1 kW |
PTO (claimed) | 71 hp
52.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
cab with heat standard, air-conditioning optional |
Hydraulics | |
|---|---|
Valves | 2 |
3 optional | |
Total flow | 15.85 gpm
60.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/540E |
Front PTO | optional |
Front PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 95.59 inches
242 cm |
Weight | 8,774 lbs
3979 kg |
Front tire | 320/70R24 |
Rear tire | 18.4R30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging amps | 65 |
Battery volts | 12 |
Engine
| 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Engine Detail — 268.5 ci / 4.4 L Diesel
Manufacturer | Perkins 1104C-44 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 268.5 ci
4.4 L |
Power | 82 hp
61.1 kW |
Rated RPM | 2200 |
Torque | 216.8 lb-ft
294.0 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Transmission
| 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Dimensions
| 2005 - ???? | 2005 - ???? |
|---|
2005 - ???? |
|---|
Limb 80 Tires | |
|---|---|
Ag front | 320/70R24 |
Ag rear | 18.4R30 |
Dimensions | |
|---|---|
Wheelbase | 95.59 inches
242 cm |
Length | 155.9 inches
395 cm |
Width | 81.1 inches
205 cm |
Height | 101.4 inches
257 cm |
Weight | 8,774 lbs
3979 kg |
Ground clearance | 16.77 inches
42 cm |
Photos
Limb LUXS 80
Recommended Implements & Sizing Guide
Engineering recommendations for Limb LUXS 80 based on its 82 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Limb LUXS 80.
Estimated Continuous Field Runtime: 5.2 hrs
Approximately 5.2 hours of continuous field operation at ~75% rated power on a full tank (22.2 gal / 84 L).
Estimated 75% Load Fuel Burn~4.3 gal/hr (16.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Limb LUXS 80 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Limb LUXS 80.
Converted Equivalents:
Horsepower (HP)82 hp
Kilowatts (kW)61.1 kW
Metric Horsepower (PS / CV)83.1 PS
Direct Competitor Comparison
Compare Limb LUXS 80 against same-era industry alternatives in the same horsepower class.
Current Model
Limb
Limb LUXS 80
Engine Power:Diesel (listed): 82 hp / 61.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 844
Engine Power:73.8
Production Years:1974 - 1980
Related models
Limb 60
- Power:
- 58
- Production years:
- 2005 - 2015