Müller TM14
The Müller TM14 is a tractor produced by M Ller. It is equipped with a 358.8 ci 5.9 L engine. The listed engine power is Diesel (listed): 155 hp / 115.6 kW. Transmission: Clark. Operating weight: 13890 lbs 6300 kg.
Engine Power
Diesel (listed): 155 hp / 115.6 kW
Fuel & Capacities
95.1 gal
360.0 L
Transmission
Clark
Operating Weight
13890 lbs
6300 kg
Overview
 | 1976 - 1995
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | Müller |
Four-wheel Drive (4WD) tractor | |
Built in Brazil | |
Müller TM14 Engine | |
|---|---|
MWM 5.9L 6-cyl diesel | |
Engine details ...  |
Müller TM14 Transmission | |
|---|---|
10-speed synchronized | |
Transmission details ...  |
Müller TM14 Power | |
|---|---|
Engine | 155 hp
115.6 kW |
Drawbar (claimed) | 134 hp
99.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | planetary |
Articulated power steering | |
Hydraulic disc brakes | |
Open operator station with sunroof canopy. | |
Capacity | |
|---|---|
Fuel | 95.1 gal
360.0 L |
Hydraulic system | 26.4 gal
99.9 L |
Hydraulics | |
|---|---|
Capacity | 26.4 gal
99.9 L |
Pressure | 2000 psi
137.9 bar |
Pump flow | 31.5 gpm
119.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7716 lbs
3499 kg |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.9 inches
274 cm |
Weight | 13890 lbs
6300 kg |
Front tire | 18.4/15x34 |
Rear tire | 18.4/15x34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 35 |
Batteries | 2 |
Battery volts | 12 |
Battery AH | 135 |
Engine
Engine Detail — 358.8 ci / 5.9 L Diesel
Manufacturer | MWM TD229-6 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled inline |
Displacement | 358.8 ci
5.9 L |
Bore/Stroke | 4.016x4.724 inches
102 x 120 mm |
Power | 155 hp
115.6 kW |
Fuel system | direct injection |
Rated RPM | 2400 |
Torque | 368.9 lb-ft
500.2 Nm |
Torque RPM | 1600 |
Starter type | electric |
Oil capacity | 13.7 qts
13.0 L |
Coolant capacity | 35.9 qts
34.0 L |
Transmission
Transmission — Clark
Transmission | Clark |
Type | synchronized |
Gears | 10 forward and 2 reverse |
Clutch | 350mm dry disc |
Oil capacity | 29.6 qts
28.0 L |
Five-speed gearbox with two-speed transfer case. | |
 | |
Dimensions
Müller TM14 Tires | |
|---|---|
Ag front | 18.4/15x34 |
Ag rear | 18.4/15x34 |
Ag front | 23.1/18x26 |
23.1/18x30 | |
Ag rear | 23.1/18x26 |
23.1/18x30 | |
Dimensions | |
|---|---|
Wheelbase | 107.9 inches
274 cm |
Length | 229.5 inches
582 cm |
Width | 81.4 inches*Minimum width over 18.4/15x34 single tires.
206 cm |
Height (steering wheel) | 107.1 inches
272 cm |
Height (exhaust) | 128.7 inches
326 cm |
Weight | 13890 lbs
6300 kg |
Ballasted weight | 18300 lbs
8300 kg |
Photos
Müller TM14 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for M Ller Müller TM14 based on its 155 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for M Ller Müller TM14.
Estimated Continuous Field Runtime: 11.8 hrs
Approximately 11.8 hours of continuous field operation at ~75% rated power on a full tank (95.1 gal / 360 L).
Estimated 75% Load Fuel Burn~8.1 gal/hr (30.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
M Ller Müller TM14 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for M Ller Müller TM14.
Converted Equivalents:
Horsepower (HP)155 hp
Kilowatts (kW)115.6 kW
Metric Horsepower (PS / CV)157.1 PS
Direct Competitor Comparison
Compare Müller TM14 against same-era industry alternatives in the same horsepower class.
Current Model
M Ller
Müller TM14
Engine Power:Diesel (listed): 155 hp / 115.6 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1066
Engine Power:140
Production Years:1971 - 1976
Related models
Müller STA160
- Power:
- 152
- Production years:
- 2005 - 2015
Müller TM16
- Power:
- 152
- Production years:
- 2002 - 2004
Müller TM17
- Power:
- 173
- Production years:
- 1976 - 1995
Müller STA310
- Power:
- 310
- Production years:
- 2002 - 2012
Müller TM310
- Power:
- 310
- Production years:
- 1990 - 2002