Müller TM16
The Müller TM16 is a tractor produced by M Ller. The listed engine power is Diesel (listed): 152 hp / 113.3 kW. Transmission: 12 forward and 2 reverse. Operating weight: 15650 lbs 7098 kg.
Engine Power
Diesel (listed): 152 hp / 113.3 kW
Fuel & Capacities
103 gal
389.9 L
Transmission
12 forward and 2 reverse
Operating Weight
15650 lbs
7098 kg
Overview
 | 2002 - 2004
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | Müller (a part of Proton Primus) |
Four-wheel Drive (4WD) tractor | |
Built in Brazil | |
Müller TM16 Engine | |
|---|---|
Cummins 6-cyl diesel | |
Engine details ...  |
Müller TM16 Transmission | |
|---|---|
12-speed | |
Transmission details ...  |
Müller TM16 Power | |
|---|---|
Engine | 152 hp
113.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | planetary |
Articulated power steering | |
Hydraulic disc brakes | |
Cab standard with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 103 gal
389.9 L |
Hydraulic system | 11.9 gal
45.0 L |
Hydraulics | |
|---|---|
Capacity | 11.9 gal
45.0 L |
Dimensions & Tires | |
|---|---|
Wheelbase | 112.6 inches
286 cm |
Weight | 15650 lbs
7098 kg |
Front tire | 18.4/15x34 |
Rear tire | 18.4/15x34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 90 |
Charging volts | 14 |
Batteries | 2 |
Battery volts | 12 |
Engine
Engine Detail — Diesel
Manufacturer | Cummins 6BT5.9 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Power | 152 hp
113.3 kW |
Fuel system | direct injection |
Rated RPM | 2500 |
Torque | 410.1 lb-ft
556.1 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Coolant capacity | 39.1 qts
37.0 L |
Transmission
Transmission — 12 forward and 2 reverse
Gears | 12 forward and 2 reverse |
Clutch | ceramic disc |
Oil capacity | 22.2 qts
21.0 L |
Six speed gearbox with two-speed transfer case. | |
Dimensions
Müller TM16 Tires | |
|---|---|
Ag front | 18.4/15x34 |
Ag rear | 18.4/15x34 |
Ag front | 23.1/18x30 |
23.1/18x26 | |
Ag rear | 23.1/18x30 |
23.1/18x26 | |
Dimensions | |
|---|---|
Wheelbase | 112.6 inches
286 cm |
Length | 200.8 inches
510 cm |
Width | 94 inches
238 cm |
Height | 106.3 inches
270 cm |
Weight | 15650 lbs
7098 kg |
Ballasted weight | 18740 lbs
8500 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for M Ller Müller TM16 based on its 152 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for M Ller Müller TM16.
Estimated Continuous Field Runtime: 13 hrs
Approximately 13 hours of continuous field operation at ~75% rated power on a full tank (103 gal / 389.9 L).
Estimated 75% Load Fuel Burn~7.9 gal/hr (29.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
M Ller Müller TM16 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for M Ller Müller TM16.
Converted Equivalents:
Horsepower (HP)152 hp
Kilowatts (kW)113.3 kW
Metric Horsepower (PS / CV)154.1 PS
Direct Competitor Comparison
Compare Müller TM16 against same-era industry alternatives in the same horsepower class.
Current Model
M Ller
Müller TM16
Engine Power:Diesel (listed): 152 hp / 113.3 kW
★ Baseline Reference
Related models
Müller TM12
- Power:
- 122
- Production years:
- 1976 - 1995
Müller STA160
- Power:
- 152
- Production years:
- 2005 - 2015
Müller TM14
- Power:
- 155
- Production years:
- 1976 - 1995
Müller TM17
- Power:
- 173
- Production years:
- 1976 - 1995
Müller STA310
- Power:
- 310
- Production years:
- 2002 - 2012