Müller TM12
The Müller TM12 is a tractor produced by M Ller. It is equipped with a 358.8 ci 5.9 L engine. The listed engine power is Diesel (listed): 122 hp / 91.0 kW. Transmission: Clark. Operating weight: 13890 lbs 6300 kg.
Engine Power
Diesel (listed): 122 hp / 91.0 kW
Fuel & Capacities
96.4 gal
364.9 L
Transmission
Clark
Operating Weight
13890 lbs
6300 kg
Overview
 | 1976 - 1995
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | Müller |
Four-wheel Drive (4WD) tractor | |
Built in Brazil | |
Müller TM12 Engine | |
|---|---|
MWM 5.9L 6-cyl diesel | |
Engine details ...  |
Müller TM12 Transmission | |
|---|---|
10-speed synchronized | |
Transmission details ...  |
Müller TM12 Power | |
|---|---|
Engine | 122 hp
91.0 kW |
Drawbar (claimed) | 106 hp
79.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | planetary |
Articulated power steering | |
Hydraulic disc brakes | |
Open operator station with sunroof canopy. | |
Capacity | |
|---|---|
Fuel | 96.4 gal
364.9 L |
Hydraulic system | 18.5 gal
70.0 L |
Hydraulics | |
|---|---|
Capacity | 18.5 gal
70.0 L |
Pressure | 2000 psi
137.9 bar |
Pump flow | 31 gpm
117.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7716 lbs
3499 kg |
Dimensions & Tires | |
|---|---|
Wheelbase | 104.3 inches
264 cm |
Weight | 13890 lbs
6300 kg |
Front tire | 18.4/15x30 |
Rear tire | 18.4/15x30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 35 |
Battery volts | 12 |
Battery AH | 135 |
Engine
Engine Detail — 358.8 ci / 5.9 L Diesel
Manufacturer | MWM D229-6 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled inline |
Displacement | 358.8 ci
5.9 L |
Bore/Stroke | 4.016x4.724 inches
102 x 120 mm |
Power | 122 hp
91.0 kW |
Fuel system | direct injection |
Rated RPM | 2300 |
Torque | 289.3 lb-ft
392.3 Nm |
Torque RPM | 1400 |
Starter type | electric |
Oil capacity | 11.6 qts
11.0 L |
Coolant capacity | 33.8 qts
32.0 L |
Transmission
Transmission — Clark
Transmission | Clark |
Type | synchronized |
Gears | 10 forward and 2 reverse |
Clutch | 350mm dry disc |
Oil capacity | 29.6 qts
28.0 L |
Five-speed gearbox with two-speed transfer case. | |
 | |
Dimensions
Müller TM12 Tires | |
|---|---|
Ag front | 18.4/15x30 |
Ag rear | 18.4/15x30 |
Ag front | 16.9/14x30 |
Ag rear | 16.9/14x30 |
Dimensions | |
|---|---|
Wheelbase | 104.3 inches
264 cm |
Length | 217.1 inches
551 cm |
Width | 91.9 inches*Minimum width over 18.4/15x30 single tires.
233 cm |
Height (steering wheel) | 98.4 inches
249 cm |
Height (exhaust) | 122 inches
309 cm |
Weight | 13890 lbs
6300 kg |
Ballasted weight | 16760 lbs
7602 kg |
Photos
Müller TM12 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for M Ller Müller TM12 based on its 122 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for M Ller Müller TM12.
Estimated Continuous Field Runtime: 15.2 hrs
Approximately 15.2 hours of continuous field operation at ~75% rated power on a full tank (96.4 gal / 364.9 L).
Estimated 75% Load Fuel Burn~6.3 gal/hr (24 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
M Ller Müller TM12 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for M Ller Müller TM12.
Converted Equivalents:
Horsepower (HP)122 hp
Kilowatts (kW)91 kW
Metric Horsepower (PS / CV)123.7 PS
Direct Competitor Comparison
Compare Müller TM12 against same-era industry alternatives in the same horsepower class.
Current Model
M Ller
Müller TM12
Engine Power:Diesel (listed): 122 hp / 91.0 kW
★ Baseline Reference
Related models
Müller STA160
- Power:
- 152
- Production years:
- 2005 - 2015
Müller STA310
- Power:
- 310
- Production years:
- 2002 - 2012
Müller TM16
- Power:
- 152
- Production years:
- 2002 - 2004
Müller TM310
- Power:
- 310
- Production years:
- 1990 - 2002
Müller TM25
- Power:
- 235
- Production years:
- 1980 - 1995