Marshall Field Marshall Series II

The Marshall Field Marshall Series II is a tractor produced by Marshall. It is equipped with a 310.4 ci 5.1 L engine. The listed engine power is Diesel (listed): 40 hp / 29.8 kW. Transmission: 3 forward and 1 reverse.

Engine Power

Diesel (listed): 40 hp / 29.8 kW

Fuel & Capacities

Diesel

Transmission

3 forward and 1 reverse

Overview

	1947 - 1949 Field Marshall SeriesStandard-tread tractor Field Marshall Series Standard-tread tractor

Production
Manufacturer	Marshall
Standard-tread tractor
Built in Gainsborough, England

Marshall Series II Engine
Marshall 5.1L 1-cyl diesel
Engine details ...

Marshall Series II Transmission
3-speed gear
Transmission details ...

Marshall Series II Power
Engine	40 hp 29.8 kW

Mechanical
Two-wheel drive
Steering	manual
Open operator station.

Dimensions & Tires
Full dimensions and tires ...

Engine

Engine Detail — 310.4 ci / 5.1 L Diesel

Manufacturer	Marshall
Fuel Type	Diesel
Configuration	1-cylinder
Displacement	310.4 ci 5.1 L
Bore/Stroke	6.625x9 inches 168 x 229 mm
Power	40 hp 29.8 kW
Rated RPM	750
Starter type	starting cartridge

Transmission

Transmission — 3 forward and 1 reverse gear

Type	gear
Gears	3 forward and 1 reverse

Dimensions

Dimensions

Photos

Field Marshall Series II tractor.

Field Marshall Series II operator station and controls.

Recommended Implements & Sizing Guide

Engineering recommendations for Marshall Field Marshall Series II based on its 40 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Marshall Field Marshall Series II.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours