Massey Ferguson 1526

The Massey Ferguson 1526 is a tractor produced by Massey Ferguson. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (gross): 24.8 hp / 18.5 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 1873 lbs 849 kg.

Engine Power

Diesel (gross): 24.8 hp / 18.5 kW

Fuel & Capacities

8.3 gal 31.4 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

1873 lbs 849 kg

Overview

	2011 - 2025 Model year 2011-20142016-2025 1500 SeriesCompact Utility tractor 1500 Series Compact Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Compact Utility tractor

Massey Ferguson 1526 Engine
Iseki 1.5L 3-cyl diesel
Fuel tank	8.3 gal 31.4 L
Engine details ...

Massey Ferguson 1526 Transmission
hydrostatic
Transmission details ...

Massey Ferguson 1526 Power
Engine (gross)	24.8 hp 18.5 kW
PTO (claimed)	20.1 hp 15.0 kW

Mechanical
Four-wheel drive
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Mid valves	2
Pump flow	5.5 gpm 20.8 lpm
Total flow	8.7 gpm 32.9 lpm
Steering flow	3.2 gpm 12.1 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1322 lbs 599 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540 (1.375)
Mid PTO	independent
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	61.4 inches 155 cm
Weight	1873 lbs 849 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

1600/1500 Series Compact Tractors published in 2011, by Massey Ferguson

Engine

Engine Detail — 91.4 ci / 1.5 L Diesel

Manufacturer	Iseki
Configuration	3-cylinder, liquid-cooled
2600 diesel
Displacement	91.4 ci 1.5 L
Bore/Stroke	3.43x3.31 inches 87 x 84 mm
Power (gross)	24.8 hp 18.5 kW
Starter	electric
Starter volts	12

Transmission

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

Massey Ferguson 1526 Tires

Dimensions
Wheelbase	61.4 inches 155 cm
Length	111 inches 281 cm
Width	49.2 inches 124 cm
Height (ROPS)	95.5 inches 242 cm
Shipping weight	1873 lbs 849 kg
Ground clearance	11 inches 27 cm

Attachments

Attachment overview
60" mower deck
Front-end loader

60" Mower deck
Type	Massey Ferguson
Cutting width	60 inches 152 cm

Photos

Massey Ferguson 1526 with L90 front-end loader, right side.

Massey Ferguson 1526 with L90 front-end loader, left side.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 1526 based on its 24.8 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1526.

Estimated Continuous Field Runtime: 6.4 hrs

Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (8.3 gal / 31.4 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours