Massey Ferguson 1825E

The Massey Ferguson 1825E is a tractor produced by Massey Ferguson. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 24 hp / 17.9 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2668 lbs 1210 kg.

Engine Power

Diesel (listed): 24 hp / 17.9 kW

Fuel & Capacities

10 gal 37.9 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

2668 lbs 1210 kg

Overview

	2020 - 1800E SeriesCompact Utility tractor
2020 -
1800E Series
Compact Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Compact Utility tractor
Original price	$15,991 (2020 gear )
	$16,839 (2020 hydro )

Massey Ferguson 1825E Engine
Iseki 1.5L 3-cyl diesel
Fuel tank	10 gal 37.9 L
Engine details ...

Massey Ferguson 1825E Power
Engine	24 hp 17.9 kW
Gear PTO (claimed)	20.4 hp 15.2 kW
Hydro PTO (claimed)	19.2 hp 14.3 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Pump flow	7.3 gpm 27.6 lpm
Total flow	10.9 gpm 41.3 lpm
Steering flow	3.6 gpm 13.6 lpm

Tractor hitch
Rear Type	I
Rear lift (at ends)	2205 lbs 1000 kg
Rear lift (at 24"/610mm)	1598 lbs 724 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)

Dimensions & Tires
Weight	2668 lbs 1210 kg
Front tire	7-16
Rear tire	11.2-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

E Series published in 2020, by Massey Ferguson

Engine

Engine Detail — 91.4 ci / 1.5 L Diesel

Manufacturer	Iseki
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	91.4 ci 1.5 L
Bore/Stroke	3.43x3.31 inches 87 x 84 mm
Emissions	Tier IV
Power	24 hp 17.9 kW
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed mechanical shuttle
hydrostatic

Transmission — 8 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and reverse

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

Massey Ferguson 1825E Tires
Standard tires (ag)	Front: 7-16. Rear: 11.2-24
Industrial front	27x8.50-15
Industrial rear	15x19.5

Dimensions
Length	116.5 inches 295 cm
Width	52.4 inches 133 cm
Height	97.6 inches 247 cm
Weight	2668 lbs 1210 kg
Ground clearance	11 inches 27 cm

Photos

Massey Ferguson 1825E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 1825E based on its 24 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1825E.

Estimated Continuous Field Runtime: 8 hrs

Approximately 8 hours of continuous field operation at ~75% rated power on a full tank (10 gal / 37.9 L).

Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours