Massey Ferguson 2410

The Massey Ferguson 2410 is a tractor produced by Massey Ferguson. It is equipped with a 91.5 ci 1.5 L engine. The listed engine power is Diesel (listed): 40 hp / 29.8 kW. Transmission: 12 forward and reverse. Operating weight: 2866 lbs 1300 kg.

Engine Power

Diesel (listed): 40 hp / 29.8 kW

Fuel & Capacities

10 gal 37.9 L

Transmission

12 forward and reverse

Operating Weight

2866 lbs 1300 kg

Overview

	2003 - 2008 Compact Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Compact Utility tractor

Massey Ferguson 2410 Engine
Mitsubishi 1.5L 4-cyl diesel
Fuel tank	10 gal 37.9 L
	14 gal*Total capacity with optional 15 liter auxiliary fuel tank. 53.0 L
Engine details ...

Massey Ferguson 2410 Transmission
12-speed mechanical shuttle
Transmission details ...

Massey Ferguson 2410 Power
Engine	40 hp 29.8 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic
Power steering
Mechanical wet disc brakes
Two-post mid-mount folding ROPS.

Hydraulics
Pump flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	I
Rear lift	2646 lbs 1200 kg
Front lift	882 lbs 400 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Mid PTO Type	1000/2000
Front PTO	independent
Front PTO Type	1000

Dimensions & Tires
Wheelbase	68.4 inches 173 cm
Weight	2866 lbs 1300 kg
Front tire	7.00-12
Rear tire	320/70R20
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MF 2400 published in 2003, by Massey Ferguson
MF 2400 published in 2005, by Massey Ferguson

Engine

Engine Detail — 91.5 ci / 1.5 L Diesel

Manufacturer	Mitsubishi
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	91.5 ci 1.5 L
Emissions	Stage II
Power	40 hp 29.8 kW
Rated RPM	3000
Torque	74 lb-ft 100.3 Nm
Torque RPM	2100
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	230mm dry disc
Four gears in three ranges with left-hand shuttle.
Massey 2410 with 320/70R20 rear tires.

Dimensions

Massey Ferguson 2410 Tires
Standard tires (ag)	Front: 7.00-12. Rear: 320/70R20

Dimensions
Wheelbase	68.4 inches 173 cm
Length	120.3 inches 305 cm
Height (hood)	52.2 inches 132 cm
Weight	2866 lbs 1300 kg
Ground clearance	15.7 inches 39 cm

Photos

Massey Ferguson 2410 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 2410 based on its 40 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 2410.

Estimated Continuous Field Runtime: 4.8 hrs

Approximately 4.8 hours of continuous field operation at ~75% rated power on a full tank (10 gal / 37.9 L).

Estimated 75% Load Fuel Burn~2.1 gal/hr (7.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours