Massey Ferguson 2607H

The Massey Ferguson 2607H is a tractor produced by Massey Ferguson. It is equipped with a 157.9 ci 2.6 L engine. The listed engine power is Diesel (gross): 74 hp / 55.2 kW. Transmission: 8 forward and reverse. Operating weight: 5269 to 5864 pounds.

Engine Power

Diesel (gross): 74 hp / 55.2 kW

Fuel & Capacities

14.5 gal 54.9 L

Transmission

8 forward and reverse

Operating Weight

5269 to 5864 pounds

Overview

	2016 - 2600H SeriesUtility tractor
2016 -
2600H Series
Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Original price was $25,934 in 2017

Massey Ferguson 2607H Engine
Simpson 2.6L 3-cyl diesel
Fuel tank	14.5 gal 54.9 L
Engine details ...

Massey Ferguson 2607H Transmission
8-speed sync shuttle
Transmission details ...

Massey Ferguson 2607H Power
Engine (gross)	74 hp 55.2 kW
PTO (claimed)	64 hp 47.7 kW

Mechanical
Two- or four-wheel drive
Final drives	outboard planetary
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Valves	2
Pump flow	10.6 gpm 40.1 lpm
Total flow	15.7 gpm 59.4 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at 24"/610mm)	2755 lbs 1249 kg

Power Take-off (PTO)
2WD Rear PTO	live
4WD Rear PTO	independent
Rear PTO Type	540 (1.375)

Dimensions & Tires
2WD Wheelbase	80.7 inches 204 cm
4WD Wheelbase	81.5 inches 207 cm
Weight	5269 to 5864 pounds
Front tire	7.5x16
2WD Rear tire	16.9x28
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 157.9 ci / 2.6 L Diesel

Manufacturer	Simpson
Configuration	turbocharged intercooled diesel, 3-cylinder, liquid-cooled inline
Displacement	157.9 ci 2.6 L
Bore/Stroke	3.66x5.00 inches 93 x 127 mm
Emissions	Tier IV
Emission control	exhaust gas recirculation with diesel oxidation catalyst (DOC) (EGR)
Power (gross)	74 hp 55.2 kW
Fuel system	electronic high-pressure common rail
Rated RPM	2000
Starter	electric
Starter volts	12

Transmission

Transmission — 8 forward and reverse sync shuttle

Type	sync shuttle
Gears	8 forward and reverse

Dimensions

Massey Ferguson 2607H Tires
2WD Standard tires (ag)	Front: 7.5x16. Rear: 16.9x28
4WD Standard tires (ag)	Front: 9.5x24. Rear: 16.9x28
2WD Industrial front	11L15
2WD Industrial rear	14.9x24
4WD Industrial front	12.5/80-18
4WD Industrial rear	16.9x24

Dimensions
2WD Wheelbase	80.7 inches 204 cm
4WD Wheelbase	81.5 inches 207 cm
2WD Length	138 inches 350 cm
4WD Length	139 inches 353 cm
Width	72.9 inches 185 cm
Height	94.5 inches 240 cm
2WD Weight	5269 lbs 2390 kg
4WD Weight	5864 lbs 2659 kg

Attachments

Attachment overview
Massey Ferguson L135E loader
Massey Ferguson 911X loader

Photos

Massey Ferguson 2607H

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 2607H based on its 74 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 2607H.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (14.5 gal / 54.9 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours