Massey Ferguson 440

The Massey Ferguson 440 is a tractor produced by Massey Ferguson. It is equipped with a 244.1 ci 4.0 L engine. The listed engine power is Diesel (listed): 82 hp / 61.1 kW. Transmission: 12 forward and 4 reverse. Drive type: 4x2 2WD. Operating weight: 5776 to 6702 pounds.

Engine Power

Diesel (listed): 82 hp / 61.1 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

19.8 gal 74.9 L

Transmission

12 forward and 4 reverse

Operating Weight

5776 to 6702 pounds

Overview

	2001 - 2010 400 SeriesUtility tractor 400 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Canoas, Brazil

Massey Ferguson 440 Engine
Perkins 4.0L 4-cyl diesel
Fuel tank	19.8 gal 74.9 L
Engine details ...

Massey Ferguson 440 Power
Engine	82 hp 61.1 kW
PTO (claimed)	70.7 hp 52.7 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Wet disc brakes
Open operator station. Two-post ROPS optional with available canopy.

Hydraulics
Pressure	2466 psi 170.0 bar
Pump flow	11.1 gpm 42.0 lpm

Tractor hitch
Rear Type	II
Control	draft, position, and response control

Power Take-off (PTO)
Rear PTO	live
	independent (optional)
Rear PTO Type	540 (1.375)
Engine RPM	540@1900

Dimensions & Tires
2WD Wheelbase	84.3 inches 214 cm
4WD Wheelbase	93.3 inches 236 cm
Weight	5776 to 6702 pounds
Front tire	7.50-16
Rear tire	18.4-30 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 244.1 ci / 4.0 L Diesel

Manufacturer	Perkins P4000
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	244.1 ci 4.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	82 hp 61.1 kW
Fuel system	direct injection
Rated RPM	2200
Torque	212.4 lb-ft 288.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed sliding spur gear
12-speed synchromesh

Transmission — 8 forward and 2 reverse sliding spur gear

Type	sliding spur gear
Gears	8 forward and 2 reverse

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse

Dimensions

Massey Ferguson 440 Tires
Standard tires (ag)	Front: 7.50-16. Rear: 18.4-30 (2WD)
	Front: 12.4-24. Rear: 18.4-30 (4WD)

Dimensions
2WD Wheelbase	84.3 inches 214 cm
4WD Wheelbase	93.3 inches 236 cm
2WD Length	156.7 inches 398 cm
4WD Length	162.6 inches 413 cm
Height (ROPS)	101.6 inches 258 cm
Height (exhaust)	96.1 inches 244 cm
2WD Shipping weight	5,776 lbs 2619 kg
4WD Shipping weight	6,702 lbs 3040 kg

Photos

Massey Ferguson 440 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 440 based on its 82 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 440.

Estimated Continuous Field Runtime: 4.6 hrs

Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (19.8 gal / 75 L).

Estimated 75% Load Fuel Burn~4.3 gal/hr (16.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours