Massey Ferguson 292

The Massey Ferguson 292 is a tractor produced by Massey Ferguson. It is equipped with a 250 ci 4.1 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 12 forward and 4 reverse. Operating weight: 6819 to 7180 pounds.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Fuel & Capacities

direct injection

Transmission

12 forward and 4 reverse

Operating Weight

6819 to 7180 pounds

Overview

	1994 - 2005 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Canoas, Brazil

Massey Ferguson 292 Engine
Perkins 4.1L 4-cyl diesel
Engine details ...

Massey Ferguson 292 Transmission
12-speed gear
Transmission details ...

Massey Ferguson 292 Power
Engine	105 hp 78.3 kW
PTO (claimed)	93.5 hp 69.7 kW

Mechanical
Two- or four-wheel drive
Final drives	planetary
Differential lock	mechanical rear
Power steering
Mechanical wet disc brakes
Two-post fixed ROPS.

Hydraulics
Pump flow	11.1 gpm 42.0 lpm

Tractor hitch
Rear lift	7055 lbs 3200 kg

Power Take-off (PTO)
Rear PTO	live
	independent OptOptional
Clutch	mechanical (live)
	hydraulic (independent)
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1683
	1000@1683

Dimensions & Tires
2WD Wheelbase	90 inches 228 cm
4WD Wheelbase	93.3 inches 236 cm
Weight	6819 to 7180 pounds
Front tire	9.00-16
2WD Rear tire	18.4-34
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	35
Battery volts	12
Battery AH	90

References

MF 292 published in 1994, by Massey Ferguson

Engine

Engine Detail — 250 ci / 4.1 L Diesel

Manufacturer	Perkins 4000T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	250 ci 4.1 L
Bore/Stroke	3.98x5.00 inches 101 x 127 mm
Power	105 hp 78.3 kW
Fuel system	direct injection
Air cleaner	dry
Compression	17.5:1
Rated RPM	2200
Torque	297 lb-ft 402.7 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and 4 reverse gear

Type	gear
Gears	12 forward and 4 reverse
With 18.4-34 rear tires.

Dimensions

Massey Ferguson 292 Tires
2WD Standard tires (ag)	Front: 9.00-16. Rear: 18.4-34
4WD Standard tires (ag)	Front: 14.9-24. Rear: 18.4-34
2WD Optional tires (ag)	Front: 9.00-16. Rear: 23.1-26
2WD Optional tires (ag)	Front: 10.00-16. Rear: 23.1-30
4WD Optional tires (ag)	Front: 14.9-24. Rear: 23.1-26
4WD Optional tires (ag)	Front: 14.9-26. Rear: 23.1-30
4WD Optional tires (ag)	Front: 14.9-28. Rear: 23.1-30

Dimensions
2WD Wheelbase	90 inches 228 cm
4WD Wheelbase	93.3 inches 236 cm
2WD Length	144.5 inches 367 cm
4WD Length	150.8 inches 383 cm
Width	78.4 inches 199 cm
Height (ROPS)	104.9 inches 266 cm
Rear tread	60 to 91.9 inches 152 to 233 cm

Massey Ferguson 292 Weight
2WD	6819 lbs 3093 kg
4WD	7180 lbs 3256 kg
2WD Ballasted	9524 lbs 4320 kg
4WD Ballasted	13228 lbs 6000 kg

Photos

Massey Ferguson 292

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 292 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 292.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours