Massey Ferguson 295

The Massey Ferguson 295 is a tractor produced by Massey Ferguson. It is equipped with a 358 ci 5.9 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 8 forward and 2 reverse. Operating weight: 8378 lbs 3800 kg.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Fuel & Capacities

40.4 gal 152.9 L

Transmission

8 forward and 2 reverse

Operating Weight

8378 lbs 3800 kg

Overview

	1978 - 1990 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor

Massey Ferguson 295 Engine
Perkins 5.9L 6-cyl diesel
Fuel tank	40.4 gal 152.9 L
Engine details ...

Massey Ferguson 295 Transmission
8-speed
Transmission details ...

Massey Ferguson 295 Power
Engine	105 hp 78.3 kW
PTO (claimed)	74 hp*At 540 RPM. 55.2 kW

Mechanical
Two-wheel drive
Power steering
Mechnical wet disc brakes
Two-post ROPS.

Hydraulics
Pressure	2987 psi 206.0 bar
Pump flow	4.5 gpm 17.0 lpm

Tractor hitch
Rear lift	5512 lbs 2500 kg

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Engine RPM	540@1700

Dimensions & Tires
Wheelbase	97.6 inches 247 cm
Weight	8378 lbs 3800 kg
Front tire	9.00x16
Rear tire	18.4/15-34
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	35
Battery volts	12
Battery AH	135

Engine

Engine Detail — 358 ci / 5.9 L Diesel

Manufacturer	Perkins A6.358
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	358 ci 5.9 L
Bore/Stroke	4.10x4.50 inches 104 x 114 mm
Power	105 hp 78.3 kW
Fuel system	direct injection
Air cleaner	dual dry element
Compression	14:1
Rated RPM	2200
Torque	258.2 lb-ft 350.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil capacity	13.75 qts 13.0 L
Coolant capacity	23.4 qts 22.1 L

Transmission

Transmission — 8 forward and 2 reverse

Gears	8 forward and 2 reverse
Clutch	330mm cerametallic disc
Oil capacity	40.2 qts 38.0 L
With 18.4x34 rear tires.

Dimensions

Massey Ferguson 295 Tires
Ag front	9.00x16
Ag rear	18.4/15-34
Ag rear	23.1/18-26

Dimensions
Wheelbase	97.6 inches 247 cm
Length	163 inches 414 cm
Height (steering wheel)	70.9 inches 180 cm
Weight	8378 lbs 3800 kg
Front tread	54.3 to 78.4 inches 137 to 199 cm
Rear tread	55.9 to 92.1 inches 141 to 233 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 295 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 295.

Estimated Continuous Field Runtime: 7.4 hrs

Approximately 7.4 hours of continuous field operation at ~75% rated power on a full tank (40.4 gal / 152.9 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours