Massey Ferguson 274

The Massey Ferguson 274 is a tractor produced by Massey Ferguson. It is equipped with a 236 ci 3.9 L engine. The listed engine power is 55.39 hp 41.3 kW. Transmission: 12 forward and 4 reverse. Operating weight: 5985 lbs 2714 kg.

Engine Power

55.39 hp 41.3 kW

Fuel & Capacities

16 gal 60.6 L

Transmission

12 forward and 4 reverse

Operating Weight

5985 lbs 2714 kg

Overview

	1982 - 1987 Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Original price was $23,000 in 1987

Massey Ferguson 274 Engine
Perkins 3.9L 4-cyl diesel
Fuel tank	16 gal 60.6 L
Engine details ...

Massey Ferguson 274 Transmission
12-speed synchromesh
Transmission details ...

Massey Ferguson 274 Power
PTO (claimed)	55 hp 41.0 kW
Drawbar (tested)	46.13 hp 34.4 kW
PTO (tested)	55.39 hp 41.3 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	pedal-operated
Power steering
Differential mechanical dry disc brakes
Two-post ROPS.

Hydraulics
Type	open center
Valves	2
Pump flow	9.4 gpm 35.6 lpm

Tractor hitch
Rear Type	II
Control	draft and position control
Rear lift (at 24"/610mm)	3670 lbs 1664 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/ground
Front PTO	direct-drive
Front PTO Type	2250

Dimensions & Tires
Wheelbase	87.5 inches 222 cm
Weight	5985 lbs 2714 kg
Front tire	11.2-24
Rear tire	16.9-30
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

294,274,254 published in 1984, by Massey Ferguson

Engine

Engine Detail — 236 ci / 3.9 L Diesel

Manufacturer	Perkins A4.236
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	236 ci 3.9 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Fuel system	direct injection
Air cleaner	oil bath
Compression	16:1
Rated RPM	2200
Starter volts	12

Transmission

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse
Clutch	11-inch dual dry disc
Four gears in three ranges, plus reverse range.

Dimensions

Massey Ferguson 274 Tires
Standard tires (ag)	Front: 11.2-24. Rear: 16.9-30

Dimensions
Wheelbase	87.5 inches 222 cm
Operating weight	5985 lbs 2714 kg
Ballasted weight	8190 lbs 3714 kg
Clearance (front axle)	14 inches 35 cm
Front tread	59.5 inches 151 cm
Rear tread	59 to 79 inches 149 to 200 cm

Tests

Nebraska Tractor Test 1521
Diesel 12-speed 4WD May 12 - 26, 1983 Link: Nebraska Tractor Test 1521 file
PTO performance
Power at rated engine speed	55.39 hp 41.3 kW
Fuel use	3.4 gal/hour 12.9 l/hour
Power at rated PTO speed	54.26 hp 40.5 kW
Fuel use	3.1 gal/hour 11.7 l/hour
Drawbar performance
Max power	46.13 hp 34.4 kW
Fuel use	3.4 gal/hour 12.9 l/hour
Gear 8 used for power test.

Photos

Massey Ferguson 274 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 274 based on its 55.39 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 274.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (16 gal / 60.6 L).

Estimated 75% Load Fuel Burn~2.9 gal/hr (10.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours