Massey Ferguson 460

The Massey Ferguson 460 is a tractor produced by Massey Ferguson. It is equipped with a 244.1 ci 4.0 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 12 forward and 4 reverse. Drive type: 4x2 2WD. Operating weight: 7882 to 8686 pounds.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

55.5 gal 210.1 L

Transmission

12 forward and 4 reverse

Operating Weight

7882 to 8686 pounds

Overview

	2001 - 2010 400 SeriesUtility tractor 400 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Canoas, Brazil

Massey Ferguson 460 Engine
Perkins 4.0L 4-cyl diesel
Fuel tank	55.5 gal 210.1 L
Engine details ...

Massey Ferguson 460 Transmission
12-speed synchromesh
Transmission details ...

Massey Ferguson 460 Power
Engine	105 hp 78.3 kW
PTO (claimed)	90.9 hp 67.8 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Wet disc brakes
Open operator station. Two-post ROPS optional with available canopy.

Hydraulics
Pressure	2466 psi 170.0 bar
Pump flow	13.2 gpm 50.0 lpm

Tractor hitch
Rear Type	II
Control	draft, position, and response control

Power Take-off (PTO)
Rear PTO	live
	independent (optional)
Rear PTO Type	540 (1.375)
	540/1000 (optional)
Engine RPM	540@1900

Dimensions & Tires
2WD Wheelbase	93.3 inches 236 cm
4WD Wheelbase	96.9 inches 246 cm
Weight	7882 to 8686 pounds
Front tire	9.00-16
Rear tire	18.4-34 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 244.1 ci / 4.0 L Diesel

Manufacturer	Perkins P4000T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	244.1 ci 4.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	105 hp 78.3 kW
Fuel system	direct injection
Rated RPM	2200
Torque	281.7 lb-ft 382.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse

Dimensions

Massey Ferguson 460 Tires
Standard tires (ag)	Front: 9.00-16. Rear: 18.4-34 (2WD)
	Front: 14.9-24. Rear: 18.4-34 (4WD)

Dimensions
2WD Wheelbase	93.3 inches 236 cm
4WD Wheelbase	96.9 inches 246 cm
2WD Length	179.5 inches 455 cm
4WD Length	182.3 inches 463 cm
Height (ROPS)	103.9 inches 263 cm
Height (exhaust)	110.2 inches 279 cm
2WD Shipping weight	7,882 lbs 3575 kg
4WD Shipping weight	8,686 lbs 3939 kg

Photos

Massey Ferguson 460 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 460 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 460.

Estimated Continuous Field Runtime: 10.2 hrs

Approximately 10.2 hours of continuous field operation at ~75% rated power on a full tank (55.5 gal / 210.1 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours