Massey Ferguson 5711

The Massey Ferguson 5711 is a tractor produced by Massey Ferguson. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: Dyna-4. Operating weight: 9195 to 10011 pounds.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Fuel & Capacities

38.3 gal 145.0 L

Transmission

Dyna-4

Operating Weight

9195 to 10011 pounds

Overview

	2017 - 5700 SeriesUtility tractor
2017 -
5700 Series
Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Utility tractor
Original price was $65,553 in 2019

Massey Ferguson 5711 Engine
AGCO Power 4.4L 4-cyl diesel
Fuel tank	38.3 gal 145.0 L
Engine details ...

Massey Ferguson 5711 Power
Engine	105 hp 78.3 kW
PTO (claimed)	93 hp (shuttle) 69.4 kW
	96 hp (Dyna-4) 71.6 kW

Mechanical
Four-wheel drive
Final drives	internal planetary
Differential lock	electro-hydraulic rear
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional.

Hydraulics
Type	open center
Valves	2 or 3
Pump flow	15.1 gpm 57.2 lpm
	25.9 gpm*Optional, with additional 41L auxiliary pump. 98.0 lpm

Tractor hitch
Rear Type	II
Rear lift (at 24"/610mm)	7710 lbs 3497 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E/1000 OptOptional

Dimensions & Tires
Wheelbase	95.7 inches 243 cm
Weight	9195 to 10011 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	80
Battery volts	12

References

MF 5700 and MF 6700 12x12 Power Shuttle and Dyna-4 Global Series published in 2021, by Massey Ferguson

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	AGCO Power
Configuration	intercooled turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.25x4.72 inches 108 x 120 mm
Emissions	Tier IV
Emission control	selective catalytic reduction (SCR)
Power	105 hp 78.3 kW
Maximum Power	110 hp 82.0 kW
Fuel system	high-pressure common rail direct injection
Rated RPM	2200
Torque	417 lb-ft 565.5 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
12-speed power shuttle
16-speed four-speed power shift

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	dry disc

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Clutch	wet disc

Massey Ferguson 5711 Transmission

Transmission — Dyna-4

Transmission	Dyna-4
Type	four-speed power shift
Gears	16 forward and reverse
Clutch	wet disc

Massey Ferguson 5711 Transmission

Dimensions

Massey Ferguson 5711 Tires

Dimensions
Wheelbase	95.7 inches 243 cm
Width	70.7 inches*Minimum 179 cm
ROPS Weight	9195 lbs 4170 kg
Cab Weight	10011 lbs 4540 kg
Flange rear axle

Attachments

Attachment overview
Massey Ferguson 941X loader
Massey Ferguson 946X loader
Massey Ferguson FL3723 loader
Massey Ferguson FL3819 loader

Photos

Massey Ferguson 5711 with 931X front-end loader, right side.

Massey Ferguson 5711 with FL3819 front-end loader, left side.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 5711 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 5711.

Estimated Continuous Field Runtime: 7 hrs

Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (38.3 gal / 145 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours