Massey Ferguson 595

The Massey Ferguson 595 is a tractor produced by Massey Ferguson. It is equipped with a 318 ci 5.2 L engine. The listed engine power is Diesel (listed): 86.8 hp / 64.7 kW. Transmission: Multi-Power. Operating weight: 9,040 lbs (2WD) 4100 kg.

Engine Power

Diesel (listed): 86.8 hp / 64.7 kW

Fuel & Capacities

33.8 gal 127.9 L

Transmission

Multi-Power

Operating Weight

9,040 lbs (2WD) 4100 kg

Overview

	1974 - 1982 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Beauvais, France

Massey Ferguson 595 Engine
Perkins 5.2L 4-cyl diesel
Fuel tank	33.8 gal 127.9 L
Engine details ...

Massey Ferguson 595 Power
Engine	86.8 hp 64.7 kW

Mechanical
Two- or four-wheel drive
Final drives	outboard planetary
Steering	hydrostatic power
Wet disc brakes
Cab standard.

Hydraulics
Type	open center
Pressure	2400 psi 165.5 bar
Pump flow	6.7 gpm 25.4 lpm

Tractor hitch
Rear Type	2
Control	position and draft control with top-link sensing
Rear lift	5,400 lbs 2449 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic wet disc
Rear PTO Type	540 (1.375)
	1000 (1.375)
Engine RPM	540@1750
	1000@2000

Dimensions & Tires
Wheelbase	104.3 inches (2WD) 264 cm
	102.4 inches (4WD) 260 cm
Weight	9040 to 9900 pounds
Front tire	11.00-16
Rear tire	16.9-38 (2WD)
Full dimensions and tires ...

References

New Tractor Line 500-Series published by Massey Ferguson

Engine

Engine Detail — 318 ci / 5.2 L Diesel

Manufacturer	Perkins A4.318
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled, By 1980, Massey Ferguson model 595 tractors sold in certain markets were equipped with turbochargers.
Displacement	318 ci 5.2 L
Bore/Stroke	4.50x5.00 inches 114 x 127 mm
Power	86.8 hp 64.7 kW
Rated RPM	2000
Torque	253 lb-ft 343.1 Nm
Torque RPM	1300
Starter volts	12

Transmission

Transmission options
12-speed partial power shift
8-speed

Transmission — Multi-Power

Transmission	Multi-Power
Type	partial power shift
Gears	12 forward and 4 reverse
Clutch	305mm dry disc

Transmission — 8 forward and 2 reverse

Gears

8 forward and 2 reverse

Dimensions

Massey Ferguson 595 Tires
Standard tires (ag)	Front: 11.00-16. Rear: 16.9-38 (2WD)
	Front: 12.4-28. Rear: 16.9-38 (4WD)

Dimensions
Wheelbase	104.3 inches (2WD) 264 cm
	102.4 inches (4WD) 260 cm
Length	175.6 inches 446 cm
Height (cab)	103.5 inches 262 cm
Weight	9,040 lbs (2WD) 4100 kg
	9,900 lbs (4WD) 4490 kg

Photos

Massey Ferguson 595

Massey Ferguon 595 Mark II.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 595 based on its 86.8 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 595.

Estimated Continuous Field Runtime: 7.5 hrs

Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (33.8 gal / 127.9 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (17.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours