Deutz-Fahr 4080.4E

The Deutz-Fahr 4080.4E is a tractor produced by Deutz Fahr. It is equipped with a 244.1 ci 4.0 L engine. The listed engine power is Diesel (listed): 78.9 hp / 58.8 kW. Transmission: 30 forward and 15 reverse. Operating weight: 6173 to 7165 pounds.

Engine Power

Diesel (listed): 78.9 hp / 58.8 kW

Fuel & Capacities

18.5 gal 70.0 L

Transmission

30 forward and 15 reverse

Operating Weight

6173 to 7165 pounds

Overview

	2018 - 4E SeriesUtility tractor
2018 -
4E Series
Utility tractor

Production
Manufacturer	Deutz-Fahr
Utility tractor

Deutz-Fahr 4080.4E Engine
SDF 4.0L 4-cyl diesel
Fuel tank	18.5 gal 70.0 L
Engine details ...

Deutz-Fahr 4080.4E Transmission
30-speed partially synchronized
Transmission details ...

Deutz-Fahr 4080.4E Power
Engine	78.9 hp 58.8 kW

Mechanical
Two- or four-wheel drive
Differential lock	mechanical
Power steering
Wet disc brakes
Open operator station. Cab optional with air-conditioning.

Hydraulics
Type	open center
Valves	2
Pump flow	11.1 gpm 42.0 lpm

Tractor hitch
Rear Type	II
Rear lift	7717 lbs 3500 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tires
2WD Wheelbase	80.4 inches 204 cm
4WD Wheelbase	77.8 inches 197 cm
Weight	6173 to 7165 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

4050E - 4065E - 4075E - 485E - 4080.4E - 4090.4E - 4100.4E published in 2019, by Deutz-Fahr

Engine

Engine Detail — 244.1 ci / 4.0 L Diesel

Manufacturer	SDF 1000.4 WTI
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	244.1 ci 4.0 L
Bore/Stroke	4.13x4.54 inches 105 x 115 mm
Emissions	Stage IIIA
Power	78.9 hp 58.8 kW
Torque	236 lb-ft 320.0 Nm
Starter	electric
Starter volts	12

Transmission

Transmission — 30 forward and 15 reverse partially synchronized

Type	partially synchronized
Gears	30 forward and 15 reverse
Five synchronized gears in three ranges with shuttle and underdrive.

Dimensions

Deutz-Fahr 4080.4E Tires

Dimensions
2WD Wheelbase	80.4 inches 204 cm
4WD Wheelbase	77.8 inches 197 cm
Width	69.8 inches 177 cm

Deutz-Fahr 4080.4E Weight
2WD Open	6173 lbs 2800 kg
4WD Open	6834 lbs 3099 kg
2WD Cab	6504 lbs 2950 kg
4WD Cab	7165 lbs 3250 kg
2WD Max capacity	8378 lbs 3800 kg
4WD Max capacity	10582 lbs 4799 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr 4080.4E based on its 78.9 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr 4080.4E.

Estimated Continuous Field Runtime: 4.5 hrs

Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).

Estimated 75% Load Fuel Burn~4.1 gal/hr (15.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr 4080.4E Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr 4080.4E.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)78.9 hp

Kilowatts (kW)58.8 kW

Metric Horsepower (PS / CV)80 PS

Direct Competitor Comparison

Compare Deutz-Fahr 4080.4E against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr