Massey Ferguson 6460

The Massey Ferguson 6460 is a tractor produced by Massey Ferguson. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 115 hp / 85.8 kW. Transmission: Dyna-6. Operating weight: 10075 lbs 4570 kg.

Engine Power

Diesel (listed): 115 hp / 85.8 kW

Fuel & Capacities

39.6 gal 149.9 L

Transmission

Dyna-6

Operating Weight

10075 lbs 4570 kg

Overview

	2003 - 2013 Model year 2003-20062007-2013 6400 SeriesUtility tractor 6400 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor

Massey Ferguson 6460 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	39.6 gal 149.9 L
	52.8 gal*With optional tank. 199.8 L
Engine details ...

Massey Ferguson 6460 Power
Engine	115 hp 85.8 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Trailer brakes	hydraulic OptOptional
Cab standard with air-conditioning.

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2000
	540E@1550
	1000@2000
	1000E@1550
Front PTO	independent
Front PTO Type	1000 (1.375)
Engine RPM	1000@2040

Dimensions & Tires
4WD Wheelbase	100.4 inches 255 cm
Weight	10075 lbs 4570 kg
Front tire	13.6R28
Rear tire	16.9R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104C-E44TA
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Power	115 hp 85.8 kW
Torque	347.4 lb-ft 471.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed partial power shift
32-speed creeper

Transmission — Dyna-6

Transmission	Dyna-6
Type	partial power shift
Gears	24 forward and reverse
Clutch	electro-hydraulic wet disc
Six power shift gears in four ranges.
Type	creeper
Gears	32 forward and reverse

Dimensions

Massey Ferguson 6460 Tires
Standard tires (ag)	Front: 13.6R28. Rear: 16.9R38

Dimensions
4WD Wheelbase	100.4 inches 255 cm
Length	168 inches 426 cm
Width	78 inches 198 cm
Height (cab)	111 inches 281 cm
4WD Weight	10075 lbs 4570 kg
Front axle	QuadLink suspension
2WD Front tread	60.6 to 91.7 inches 153 to 232 cm
4WD Front tread	61 to 79.9 inches 154 to 202 cm
Rear tread	66.9 to 76.8 inches 169 to 195 cm

Photos

Massey Ferguson 6460 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 6460 based on its 115 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 6460.

Estimated Continuous Field Runtime: 6.6 hrs

Approximately 6.6 hours of continuous field operation at ~75% rated power on a full tank (39.6 gal / 149.9 L).

Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours