Massey Ferguson 7480

The Massey Ferguson 7480 is a tractor produced by Massey Ferguson. It is equipped with a 365.2 ci 6.0 L engine. The listed engine power is Diesel (listed): 143 hp / 106.6 kW. Transmission: Dyna-VT. Operating weight: 14,835 lbs 6729 kg.

Engine Power

Diesel (listed): 143 hp / 106.6 kW

Fuel & Capacities

70 gal 264.9 L

Transmission

Dyna-VT

Operating Weight

14,835 lbs 6729 kg

Overview

	2004 - 2012 Model year 2004-20072008-2012 7400 SeriesRow-Crop tractor 7400 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Beauvais, France

Variants
6480	Dyna-6
7480	Dyna-VT

Massey Ferguson 7480 Engine
Perkins 6.0L 6-cyl diesel
Fuel tank	70 gal 264.9 L
Engine details ...

Massey Ferguson 7480 Transmission
21-speed
Transmission details ...

Massey Ferguson 7480 Power
Engine	143 hp 106.6 kW
PTO (claimed)	115 hp 85.8 kW
Drawbar (tested)	100.4 hp 74.9 kW
PTO (tested)	125.7 hp 93.7 kW
Performance test details ...

Mechanical
Four-wheel drive
Power steering
Independent hydraulic wet disc brakes
Cab standard.

Hydraulics
Type	closed center
Pressure	2900 psi 200.0 bar
Valves	3 or 4
Total flow	29 gpm 109.8 lpm

Tractor hitch
Rear Type	II/IIIN
Rear lift (at 24"/610mm)	10,500 lbs 4762 kg
Front Hitch	optional

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E/1000

Dimensions & Tires
Wheelbase	109.5 inches 278 cm
Weight	14,835 lbs 6729 kg
Front tire	14.9R28
Rear tire	18.4R38
Full dimensions and tires ...

Electrical
Charging amps	120
Batteries	2
Battery CCA	505

Engine

Engine Detail — 365.2 ci / 6.0 L Diesel

Manufacturer	Perkins 1106
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	365.2 ci 6.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	143 hp 106.6 kW
Air cleaner	dual paper elements
Compression	17.5:1
Rated RPM	2200
Starter volts	12

Transmission

Transmission — DynaStep

Transmission	DynaStep
Gears	21 forward and 18 reverse
Oil capacity	13.2 qts 12.5 L

Transmission — Dyna-VT

Transmission	Dyna-VT
Gears	infinite forward and reverse (2-range)
Oil capacity	13.2 qts 12.5 L

Dimensions

Massey Ferguson 7480 Tires
Ag front	14.9R28
Ag rear	18.4R38

Dimensions
Wheelbase	109.5 inches 278 cm
Length	177 inches 449 cm
Width	80 inches 203 cm
Height	111 inches 281 cm
Operating weight	14,835 lbs 6729 kg
Ballasted weight	17,230 lbs 7815 kg
Ground clearance	14 inches 35 cm

Tests

OCED Tractor Test 2195
Diesel Dyna Step 4WD February 1 - April 1, 2004
PTO performance
Max power	125.7 hp 93.7 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Power at rated engine speed	116.3 hp 86.7 kW
Fuel use	8.0 gal/hour 30.3 l/hour
Power at rated PTO speed	124.6 hp 92.9 kW
Fuel use	8.0 gal/hour 30.3 l/hour
Drawbar performance
Max power	100.4 hp 74.9 kW
Fuel use	8.0 gal/hour 30.3 l/hour

Photos

Massey Ferguson 7480 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 7480 based on its 143 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7480.

Estimated Continuous Field Runtime: 9.4 hrs

Approximately 9.4 hours of continuous field operation at ~75% rated power on a full tank (70 gal / 265 L).

Estimated 75% Load Fuel Burn~7.4 gal/hr (28.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours