Massey Ferguson 8460

The Massey Ferguson 8460 is a tractor produced by Massey Ferguson. It is equipped with a 449.4 ci 7.4 L engine. The listed engine power is Diesel (listed): 235 hp / 175.2 kW. Transmission: Dyna-VT. Operating weight: 19136 to 19910 pounds.

Engine Power

Diesel (listed): 235 hp / 175.2 kW

Fuel & Capacities

158.5 gal 599.9 L

Transmission

Dyna-VT

Operating Weight

19910 lbs 9031 kg

Overview

	2004 - 2007 8400 SeriesRow-Crop tractor 8400 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Germany

Variants
DT200A	similar AGCO model

Massey Ferguson 8460 Engine
Sisu 7.4L 6-cyl diesel
Fuel tank	158.5 gal 599.9 L
Engine details ...

Massey Ferguson 8460 Power
Engine	235 hp 175.2 kW
PTO (claimed)	200 hp 149.1 kW
Drawbar (tested)	175.3 hp 130.7 kW
PTO (tested)	233.5 hp 174.1 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Independent hydraulic wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	closed center PFC
Pressure	2900 psi 200.0 bar
Valves	4 or 5
Total flow	39 gpm 147.6 lpm

Tractor hitch
Rear Type	III
Rear lift (at 24"/610mm)	14,400 lbs 6531 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540E/1000 OptOptional

Dimensions & Tires
Wheelbase	121 inches 307 cm
Weight	19136 to 19910 pounds
Front tire	16.9R30
Rear tire	18.4R46
Full dimensions and tires ...

References

MF 8400 Series published in 2004, by Massey Ferguson

Engine

Engine Detail — 449.4 ci / 7.4 L Diesel

Manufacturer	Sisu
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	449.4 ci 7.4 L
Bore/Stroke	4.252x5.276 inches 108 x 134 mm
Power	235 hp 175.2 kW
Air cleaner	dual paper elements
Compression	17.5:1
Rated RPM	2200
Starter volts	12

Transmission

Transmission options
42-speed power shift
continuously variable transmission

Transmission — DynaStep

Transmission	DynaStep
Type	power shift
Gears	42 forward and 36 reverse
The Dyna-Step transmission is mechanically the same as the CVT, but the operator shifts through set gears as with a power shift. There are 21 forward gear shifts in two ranges.

Transmission — Dyna-VT

Transmission	Dyna-VT
Type	continuously variable transmission
Gears	infinite forward and reverse

Dimensions

Massey Ferguson 8460 Tires
Ag front	16.9R30
Ag rear	18.4R46

Dimensions
Wheelbase	121 inches 307 cm
Length	206 inches 523 cm
Height	122 inches 309 cm
Shipping weight	19136 lbs 8680 kg
Operating weight	19910 lbs 9031 kg

Tests

OCED Tractor Test 2322
Diesel Dyna Step 4WD March 1 - May 1, 2005 Link: OCED Tractor Test 2322 file
PTO performance
Max power	233.5 hp 174.1 kW
Fuel use	12.6 gal/hour 47.7 l/hour
Power at rated engine speed	205.7 hp 153.4 kW
Fuel use	12.2 gal/hour 46.2 l/hour
Power at rated PTO speed	231.1 hp 172.3 kW
Fuel use	12.7 gal/hour 48.1 l/hour
Drawbar performance
Max power	175.3 hp 130.7 kW
Fuel use	12.1 gal/hour 45.8 l/hour
Max pull	19870 lbs 9013 kg

Photos

Massey Ferguson 8460 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 8460 based on its 235 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 8460.

Estimated Continuous Field Runtime: 13 hrs

Approximately 13 hours of continuous field operation at ~75% rated power on a full tank (158.5 gal / 600 L).

Estimated 75% Load Fuel Burn~12.2 gal/hr (46.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours