Massey Ferguson GC2300

The Massey Ferguson GC2300 is a tractor produced by Massey Ferguson. It is equipped with a 68.5 ci 1.1 L engine. The listed engine power is Diesel (listed): 22.5 hp / 16.8 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1367 lbs 620 kg.

Engine Power

Diesel (listed): 22.5 hp / 16.8 kW

Fuel & Capacities

5.5 gal 20.8 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

1367 lbs 620 kg

Overview

	2003 - 2008 GC SeriesSub-Compact Utility tractorIseki built GC Series Sub-Compact Utility tractor Iseki built

Production
Distributor	Massey Ferguson
Manufacturer	Iseki
Sub-Compact Utility tractor

Variants
GC2310TLB	tractor with loader and backhoe
ST22A	similar AGCO model

Massey Ferguson GC2300 Engine
Iseki 1.1L 3-cyl diesel
Fuel tank	5.5 gal 20.8 L
Engine details ...

Massey Ferguson GC2300 Transmission
hydrostatic
Transmission details ...

Massey Ferguson GC2300 Power
Engine	22.5 hp 16.8 kW
PTO (claimed)	18.7 hp 13.9 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Two-post fixed ROPS.

Hydraulics
Type	open center
Pump flow	4.1 gpm 15.5 lpm
Total flow	6.1 gpm 23.1 lpm
Steering flow	2 gpm 7.6 lpm

Tractor hitch
Rear Type	I
Rear lift (at ends)	1190 lbs 539 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540
Mid PTO	independent
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	57.1 inches 145 cm
Weight	1367 lbs 620 kg
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MF GC2300 Garden Compact Tractors published in 2003, by Massey Ferguson
GC2300 Series Compact Tractors published in 2005, by Massey Ferguson

Engine

Engine Detail — 68.5 ci / 1.1 L Diesel

Manufacturer	Iseki
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	68.5 ci 1.1 L
Bore/Stroke	3.08x3.07 inches 78 x 78 mm
Power	22.5 hp 16.8 kW
Rated RPM	2600
Starter volts	12

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Dimensions

Massey Ferguson GC2300 Tires

Dimensions
Wheelbase	57.1 inches 145 cm
Length	97.6 inches 247 cm
Width	45.8 inches 116 cm
Height	72.8 inches 184 cm
Shipping weight	1367 lbs 620 kg
Ground clearance	6.9 inches 17 cm

Attachments

Attachment overview
54" mid-mount mower deck
60" mid-mount mower deck
Snowblower
Blade
Front-end loader

Photos

Massey Ferguson GC2300, left side.

Massey Ferguson GC2300, right side.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson GC2300 based on its 22.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson GC2300.

Estimated Continuous Field Runtime: 4.7 hrs

Approximately 4.7 hours of continuous field operation at ~75% rated power on a full tank (5.5 gal / 20.8 L).

Estimated 75% Load Fuel Burn~1.2 gal/hr (4.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours