Valpadana 1325

The Valpadana 1325 is a tractor produced by Valpadana. It is equipped with a 46.5 ci 0.8 L engine. The listed engine power is Diesel (listed): 20.5 hp / 15.3 kW. Transmission: Hydrostatic. Operating weight: 1,246 lbs 565 kg.

Engine Power
Diesel (listed): 20.5 hp / 15.3 kW
Fuel & Capacities
5.3 gal 20.1 L
Transmission
Hydrostatic
Operating Weight
1,246 lbs 565 kg

Overview

Valpadana 1325 tractor photo
Production
Manufacturer
Valpadana
Built in San Martino, Italy
Valpadana 1325 Engine
0.8L 3-cyl diesel
Fuel tank
5.3 gal 20.1 L
Engine details ...
Valpadana 1325 Power
Engine
20.5 hp 15.3 kW
Mechanical
Four-wheel drive
Steering
power
Disc brakes
Hydraulics
Pressure
1740 psi 120.0 bar
Valves
1 standard
3 optional
Total flow
3.2 gpm 12.1 lpm
Tractor hitch
Rear Type
I
Rear lift
1,168 lbs 529 kg
Power Take-off (PTO)
Rear PTO Type
540
Dimensions & Tires
Wheelbase
42.5 inches 107 cm
Weight
1,246 lbs 565 kg
Front tire
6.5/80-12
Rear tire
7.00-12
Full dimensions and tires ...

Engine

Engine Detail — 46.5 ci / 0.8 L Diesel

Manufacturer
403C-07
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
46.5 ci 0.8 L
Bore/Stroke
2.638x2.835 inches 67 x 72 mm
Power
20.5 hp 15.3 kW
Air cleaner
dry
Rated RPM
3600
Torque
36.9 lb-ft 50.0 Nm
Torque RPM
2400

Transmission

Transmission — Hydrostatic

Transmission
Hydrostatic
Gears
infinite 2-range forward and reverse

Dimensions

Valpadana 1325 Tires
Ag front
6.5/80-12
Ag rear
7.00-12
Lawn/turf front
23x8.50-12
Lawn/turf rear
26x12.00-12
Dimensions
Wheelbase
42.5 inches 107 cm
Length
100.5 inches 255 cm
Width
26.6 inches 67 cm
Height
46.5 inches 118 cm
Weight
1,246 lbs 565 kg
Ground clearance
7.5 inches 19 cm

Photos

Valpadana 1325 tractor photo

Valpadana 1325 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Valpadana 1325 based on its 20.5 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Valpadana 1325.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (5.3 gal / 20.1 L).

Estimated 75% Load Fuel Burn~1.1 gal/hr (4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Valpadana 1325 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Valpadana 1325.

Converted Equivalents:

Horsepower (HP)20.5 hp
Kilowatts (kW)15.3 kW
Metric Horsepower (PS / CV)20.8 PS

Direct Competitor Comparison

Compare Valpadana 1325 against same-era industry alternatives in the same horsepower class.

Current Model
Valpadana

Valpadana 1325

Engine Power:Diesel (listed): 20.5 hp / 15.3 kW
★ Baseline Reference
DeereMarket Competitor

Deere 20C

Engine Power:18.5
Production Years:2009 - 2011
New HollandMarket Competitor

New Holland TC18

Engine Power:18.5
Production Years:1999 - 2003
KubotaMarket Competitor

Kubota A-195

Engine Power:18.7
Production Years:1992 - 1996
BelarusMarket Competitor

Belarus 180

Engine Power:18.5
Production Years:1998 - 1999