McCormick Intl B80 Max

The McCormick Intl B80 Max is a tractor produced by Mccormick Intl. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 74 hp / 55.2 kW. Transmission: Speed Four creeper. Operating weight: 7326 lbs 3323 kg.

Engine Power

Diesel (listed): 74 hp / 55.2 kW

Fuel & Capacities

23.8 gal 90.1 L

Transmission

Speed Four creeper

Operating Weight

7326 lbs 3323 kg

Overview

	2011 - B-Max SeriesUtility tractor
2011 -
B-Max Series
Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor

McCormick Intl B80 Max Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	23.8 gal 90.1 L
Engine details ...

McCormick Intl B80 Max Power
Engine	74 hp 55.2 kW
PTO (claimed)	68.5 hp 51.1 kW

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
	hydraulic front and rear OptOptional
Mechanical wet disc brakes
Trailer brakes	hydraulic OptOptional
Two-post ROPS. Available canopy.

Hydraulics
Pressure	2611 psi 180.0 bar
Valves	1 or 2
SCV flow	13.8 gpm 52.2 lpm
Total flow	20.2 gpm 76.5 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	5732 lbs 2600 kg
	8157 lbsOptOptional 3700 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
	540/750 (1.375)

Dimensions & Tires
2WD Wheelbase	92 inches 233 cm
4WD Wheelbase	71 inches 180 cm
Weight	7326 lbs 3323 kg
Front tire	12.4-24
Rear tire	18.4-30
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 268 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	268 ci 4.4 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier III
Power	74 hp 55.2 kW
Fuel system	direct injection
Air cleaner	dry
Compression	18.2:1
Rated RPM	2200
Torque	192.5 lb-ft 261.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed
12-speed mechanical shuttle
24-speed

Transmission — Speed Four

Transmission	Speed Four
Gears	12 forward and 4 reverse
Clutch	279.4mm mechanical dry disc
Four gears in three ranges.

Transmission — Speed Four shuttle

Transmission	Speed Four shuttle
Type	mechanical shuttle
Gears	12 forward and reverse
Transmission	Speed Four creeper
Gears	24 forward and 12 reverse

Dimensions

McCormick Intl B80 Max Tires
Standard tires (ag)	Front: 12.4-24. Rear: 18.4-30
2WD Optional tires (ag)	Front: 7.50-20. Rear: 18.4-30
4WD Optional tires (ag)	Front: 380/70R24. Rear: 480/70R34
4WD Optional tires (ag)	Front: 12.4R24. Rear: 13.6R38
	Front: 340/85R24. Rear: 420
4WD Optional tires (ag)	Front: 11.2R24. Rear: 16.9R30

Dimensions
2WD Wheelbase	92 inches 233 cm
4WD Wheelbase	71 inches 180 cm
Length	162.8 inches 413 cm
Width	81.2 inches*Minimum 206 cm
Weight	7326 lbs 3323 kg
4WD Ground clearance	16 inches 40 cm
Front tread	61 to 77 inches 154 to 195 cm
Rear tread	63 to 79 inches 160 to 200 cm

McCormick Intl B80 Max Height
Steering wheel	69.7 inches 177 cm
Hood	65.4 inches 166 cm
ROPS	100 inches 254 cm

Photos

McCormick Intl B80 Max tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl B80 Max based on its 74 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl B80 Max.

Estimated Continuous Field Runtime: 6.2 hrs

Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours