McCormick Intl CX80

The McCormick Intl CX80 is a tractor produced by Mccormick Intl. It is equipped with a 244.1 ci 4.0 L engine. The listed engine power is Diesel (listed): 84 hp / 62.6 kW. Transmission: 24 forward and 12 reverse. Operating weight: 7397 to 8466 pounds.

Engine Power

Diesel (listed): 84 hp / 62.6 kW

Fuel & Capacities

41 gal 155.2 L

Transmission

24 forward and 12 reverse

Operating Weight

7397 to 8466 pounds

Overview

	2000 - 2004 CX SeriesUtility tractor CX Series Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor
Built in Doncaster, England

McCormick Intl CX80 Engine
Perkins 4.0L 4-cyl diesel
Fuel tank	41 gal 155.2 L
Engine details ...

McCormick Intl CX80 Power
Engine	84 hp 62.6 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Two-post folding ROPS. Cab available.

Hydraulics
Type	open center
SCV flow	15.85 gpm 60.0 lpm

Tractor hitch
Rear Type	II
Rear lift	6519 lbs 2957 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic wet disc
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2000
	1000@2000

Dimensions & Tires
2WD Wheelbase	88.1 inches 223 cm
4WD Wheelbase	92.8 inches 235 cm
Weight	7397 to 8466 pounds
Front tire	10.00-16
2WD Rear tire	16.9R34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

CX Series published in 2000, by McCormick

Engine

Engine Detail — 244.1 ci / 4.0 L Diesel

Manufacturer	Perkins
Configuration	wastegate turbocharged diesel, 4-cylinder, liquid-cooled inline
Displacement	244.1 ci 4.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	84 hp 62.6 kW
Rated RPM	2200
Torque	239.7 lb-ft 325.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed two-speed power shift
24-speed creeper

Transmission — 16 forward and 8 reverse two-speed power shift

Type	two-speed power shift
Gears	16 forward and 8 reverse
Clutch	304mm dry disc
Transmission
Type	creeper
Gears	24 forward and 12 reverse

Dimensions

McCormick Intl CX80 Tires
2WD Standard tires (ag)	Front: 10.00-16. Rear: 16.9R34
4WD Standard tires (ag)	Front: 12.4R24. Rear: 16.9R34

Dimensions
2WD Wheelbase	88.1 inches 223 cm
4WD Wheelbase	92.8 inches 235 cm
Length	165.7 inches 420 cm
Width	77.3 inches*Narrow fenders 196 cm
	84.5 inches*Wide fenders 214 cm
2WD Weight	7397 lbs 3355 kg
4WD Weight	8466 lbs 3840 kg

Photos

McCormick Intl CX80 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl CX80 based on its 84 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl CX80.

Estimated Continuous Field Runtime: 9.4 hrs

Approximately 9.4 hours of continuous field operation at ~75% rated power on a full tank (41 gal / 155.2 L).

Estimated 75% Load Fuel Burn~4.4 gal/hr (16.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours