McCormick Intl MC120 Power6

The McCormick Intl MC120 Power6 is a tractor produced by Mccormick Intl. It is equipped with a 366.1 ci 6.0 L engine. The listed engine power is Diesel (listed): 115 hp / 85.8 kW. Transmission: 32 forward and 24 reverse. Operating weight: 11124 to 12742 pounds.

Engine Power

Diesel (listed): 115 hp / 85.8 kW

Fuel & Capacities

70 gal 264.9 L

Transmission

32 forward and 24 reverse

Operating Weight

11124 to 12742 pounds

Overview

	2003 - 2007 MC SeriesUtility tractor MC Series Utility tractor

Production
Manufacturer	McCormick Intl
Utility tractor
Built in Doncaster, England

McCormick Intl MC120 Engine
Perkins 6.0L 6-cyl diesel
Engine details ...

McCormick Intl MC120 Power
Engine	115 hp 85.8 kW
PTO (claimed)	98 hp 73.1 kW

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic wet clutch
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional.

Capacity
Fuel	70 gal 264.9 L
Hydraulic system	19.8 gal 74.9 L

Hydraulics
Type	pressure flow compensated (PFC)
Capacity	19.8 gal 74.9 L
Valves	2 to 4
Pump flow	28.8 gpm 109.0 lpm
SCV flow	25.1 gpm 95.0 lpm

Tractor hitch
Rear Type	IIN
Control	electronic lower link draft sensing
Rear lift (at ends)	11234 lbs 5095 kg
	13137 lbsOptOptional 5958 kg
Rear lift (at 24"/610mm)	8201 lbs 3719 kg
	10180 lbsOptOptional 4617 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2163
	1000@2200

Dimensions & Tires
Wheelbase	104.3 inches 264 cm
Weight	11124 to 12742 pounds
Front tire	11.00x16
2WD Rear tire	18.4R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
Battery volts	12

References

MC Series published in 2005, by McCormick
MC Series published in 2008, by McCormick

Engine

Engine Detail — 366.1 ci / 6.0 L Diesel

Manufacturer	Perkins 1106
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	366.1 ci 6.0 L
Bore/Stroke	3.9370x5.00 inches 100 x 127 mm
Emissions	Tier 2
Power	115 hp 85.8 kW
Rated RPM	2200
Torque	358 lb-ft 485.4 Nm
Torque RPM	1400
Starter volts	12
Oil capacity	32 qts 30.3 L
Oil change	500 h

Transmission

Transmission options
16-speed partial power shift
32-speed partial power shift with creeper

Transmission — 16 forward and 12 reverse partial power shift

Type	partial power shift
Gears	16 forward and 12 reverse
Clutch	wet disc
Oil capacity	79.2 qts 75.0 L
Four power shift speeds in four ranges with power shuttle. Available AutoSpeed transmission option with push-button range and power shifting. Available in 30 KPH and 40 KPH gearing.
With 18.4R34 rear tires and 40 KPH transmission. Reverse speeds are 15% faster than forward in the same gear.

Transmission — 32 forward and 24 reverse partial power shift with creeper

Type	partial power shift with creeper
Gears	32 forward and 24 reverse
Creeper range option doubles the available speeds in the transmission.
With 18.4R34 rear tires. Reverse speeds are 15% faster than forward in the same gear.

Dimensions

McCormick Intl MC120 Tires
2WD Standard tires (ag)	Front: 11.00x16. Rear: 18.4R38
4WD Standard tires (ag)	Front: 14.9x28. Rear: 18.4R38

Dimensions
Wheelbase	104.3 inches 264 cm
Length	188 inches 477 cm
Width	77 inches 195 cm
Height	110.6 inches 280 cm
Ground clearance	16 inches 40 cm
Front axle	2WD
Front axle	Carraro 4WD
Front axle	Independent front suspension

McCormick Intl MC120 Weight
2WD ROPS	11124 lbs 5045 kg
4WD ROPS	11652 lbs 5285 kg
2WD Cab	12742 lbs 5779 kg
4WD Cab	12742 lbs 5779 kg

Attachments

Attachment overview
McCormick L150 loader
McCormick L160 loader
McCormick L155 (self-leveling) loader
McCormick L165 (self-leveling) loader

Photos

McCormick Intl MC120 Power6 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MC120 Power6 based on its 115 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MC120 Power6.

Estimated Continuous Field Runtime: 11.7 hrs

Approximately 11.7 hours of continuous field operation at ~75% rated power on a full tank (70 gal / 265 L).

Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours