McCormick Intl MTX120

The McCormick Intl MTX120 is a tractor produced by Mccormick Intl. It is equipped with a 411.9 ci 6.8 L engine. The listed engine power is Diesel (listed): 118 hp / 88.0 kW. Transmission: 32 forward and 24 reverse. Operating weight: 13,009 lbs 5900 kg.

Engine Power

Diesel (listed): 118 hp / 88.0 kW

Fuel & Capacities

70 gal 264.9 L

Transmission

32 forward and 24 reverse

Operating Weight

13,009 lbs 5900 kg

Overview

	2004 - 2007 MTX SeriesRow-Crop tractor MTX Series Row-Crop tractor

Production
Manufacturer	McCormick Intl
Row-Crop tractor
Built in Doncaster, England

McCormick Intl MTX120 Engine
Iveco 6.8L 6-cyl diesel
Engine details ...

McCormick Intl MTX120 Power
Engine	118 hp 88.0 kW
PTO (claimed)	100 hp 74.6 kW
Drawbar (tested)	86.71 hp 64.7 kW
PTO (tested)	106.21 hp 79.2 kW
Performance test details ...

Mechanical
Four-wheel drive
Steering	hydrostatic power
Differential hydraulic wet disc brakes
Cab standard with air-conditioning.

Capacity
Fuel	70 gal 264.9 L
Hydraulic system	19.8 gal 74.9 L
Front hubs	0.6 qts (each) 0.6 L
	1.5 qts (each ILS) 1.4 L
	2 qts (braked) 1.9 L
Front diff.	6.3 qts 6.0 L
	2.2 qts (ILS) 2.1 L

Hydraulics
Type	pressure flow compensating
Capacity	19.8 gal 74.9 L
Pump flow	28.8 gpm 109.0 lpm

Tractor hitch
Rear Type	IIIN
Control	electronic lower link draft sensing
Rear lift	12945 lbs 5871 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	107.09 inches 272 cm
Weight	13,009 lbs 5900 kg
Front tire	14.9R28
Rear tire	18.4R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
	120 OptOptional
Battery volts	12

Engine

Engine Detail — 411.9 ci / 6.8 L Diesel

Manufacturer	Iveco
Configuration	turbocharged diesel, 6-cylinder 12-valve, liquid-cooled
Displacement	411.9 ci 6.8 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Power	118 hp 88.0 kW
Fuel system	mechanical injection
Air cleaner	dual dry element
Compression	17.5:1
Rated RPM	2200
Torque	383.6 lb-ft 520.2 Nm
Torque RPM	1400
Starter volts	12
Coolant capacity	30.1 qts 28.5 L
Oil capacity	16.9 qts 16.0 L

Transmission

Transmission options
16-speed power shift
32-speed

Transmission — 16 forward and 12 reverse power shift

Type	power shift
Gears	16 forward and 12 reverse
Oil capacity	79.25 qts 75.0 L

Transmission — 32 forward and 24 reverse

Gears

32 forward and 24 reverse

Dimensions

McCormick Intl MTX120 Tires
Ag front	14.9R28
Ag rear	18.4R38

Dimensions
Wheelbase	107.09 inches 272 cm
Length	203.15 inches 516 cm
Operating weight	13,009 lbs 5900 kg

Tests

OCED Tractor Test 1856
Diesel 16-speed 4WD September 8 - 16, 2005 Link: OCED Tractor Test 1856 file
PTO performance
Max power	106.21 hp 79.2 kW
Fuel use	6.0 gal/hour 22.7 l/hour
Power at rated engine speed	100.88 hp 75.2 kW
Fuel use	6.2 gal/hour 23.5 l/hour
Drawbar performance
Max power	86.71 hp 64.7 kW
Fuel use	6.2 gal/hour 23.5 l/hour
Max pull	12,892 lbs 5847 kg

Photos

MTX 120 with four-wheel drive.

Two-wheel-drive McCormick MTX 120.

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MTX120 based on its 118 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MTX120.

Estimated Continuous Field Runtime: 11.4 hrs

Approximately 11.4 hours of continuous field operation at ~75% rated power on a full tank (70 gal / 265 L).

Estimated 75% Load Fuel Burn~6.1 gal/hr (23.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours