McCormick Intl X10.75M

The McCormick Intl X10.75M is a tractor produced by Mccormick Intl. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (gross): 74.4 hp / 55.5 kW. Transmission: 12 forward and reverse. Operating weight: 7,749 lbs 3514 kg.

Engine Power

Diesel (gross): 74.4 hp / 55.5 kW

Fuel & Capacities

33 gal 124.9 L

Transmission

12 forward and reverse

Operating Weight

7,749 lbs 3514 kg

Overview

	2011 - 2014 X10 SeriesCompact Utility tractorDaedong built X10 Series Compact Utility tractor Daedong built

Production
Distributor	McCormick Intl
Manufacturer	Daedong
Compact Utility tractor
Built in South Korea

McCormick Intl X10.75M Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	33 gal 124.9 L
Engine details ...

McCormick Intl X10.75M Transmission
12-speed syncronized shuttle
Transmission details ...

McCormick Intl X10.75M Power
Engine (gross)	74.4 hp 55.5 kW
PTO (claimed)	58.4 hp 43.5 kW

Mechanical
Four-wheel drive
Differential lock	rear standard
Steering	hydrostatic power
Wet disc brakes
Cab standard with air-condioning. Optional rear wiper and CD player.

Hydraulics
Valves	1 to 3
Total flow	22.1 gpm 83.6 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at 24"/610mm)	5,290 lbs 2399 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540

Dimensions & Tires
Wheelbase	90.7 inches 230 cm
Weight	7,749 lbs 3514 kg
Front tire	11.2x24
Rear tire	16.9x30
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

X10.75M/X10.90M Cab published in 2011, by McCormick

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins D1104D-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Power (gross)	74.4 hp 55.5 kW
Fuel system	indirect injection
Pre-heating	glow plugs
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse syncronized shuttle

Type	syncronized shuttle
Gears	12 forward and reverse
Clutch	dry disc
Four gears in three ranges with synchronized shuttle.

Dimensions

McCormick Intl X10.75M Tires
Standard tires (ag)	Front: 11.2x24. Rear: 16.9x30

Dimensions
Wheelbase	90.7 inches 230 cm
Length	162.2 inches 411 cm
Width	77.8 inches 197 cm
Height (cab)	108.3 inches 275 cm
Weight	7,749 lbs 3514 kg
Ground clearance	16.7 inches 42 cm
Front tread	59.7 to 67.6 inches 151 to 171 cm
Rear tread	61.6 to 77.5 inches 156 to 196 cm

Photos

McCormick Intl X10.75M tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X10.75M based on its 74.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X10.75M.

Estimated Continuous Field Runtime: 8.5 hrs

Approximately 8.5 hours of continuous field operation at ~75% rated power on a full tank (33 gal / 124.9 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours