Mitsubishi D2500II

The Mitsubishi D2500II is a tractor produced by Mitsubishi. It is equipped with a 79.5 ci 1.3 L engine. The listed engine power is Diesel (listed): 24.7 hp / 18.4 kW.

Engine Power

Diesel (listed): 24.7 hp / 18.4 kW

Fuel & Capacities

Diesel

Overview

	1977 Compact Utility tractor

Production
Manufacturer	Mitsubishi
Compact Utility tractor

Variants
D2500IIFD	4WD
MF 125II	Massey Ferguson model

Mitsubishi D2500II Engine
Mitsubishi 1.3L 2-cyl diesel
Engine details ...

Mitsubishi D2500II Power
Engine	24.7 hp 18.4 kW

Mechanical
Two- or four-wheel drive
Open operator station.

Power Take-off (PTO)
Rear PTO Type	540 (1.375)

Dimensions & Tires
Full dimensions and tires ...

Engine

Engine Detail — 79.5 ci / 1.3 L Diesel

Manufacturer	Mitsubishi KE135
Fuel Type	Diesel
Configuration	2-cylinder
Displacement	79.5 ci 1.3 L
Bore/Stroke	3.62x3.86 inches 92 x 98 mm
Power	24.7 hp 18.4 kW
Rated RPM	2500
Starter	electric
Starter volts	12

Mitsubishi D2500II Engine

Transmission

Transmission

Dimensions

Mitsubishi D2500II Tires

Dimensions

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi D2500II based on its 24.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi D2500II.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours