Mitsubishi GCR65

The Mitsubishi GCR65 is a tractor produced by Mitsubishi. It is equipped with a 203.3 ci 3.3 L engine. The listed engine power is Diesel (listed): 64.1 hp / 47.8 kW. Transmission: infinite forward and reverse (2-range). Drive type: crawler. Operating weight: 7981 lbs 3620 kg.

Engine Power

Diesel (listed): 64.1 hp / 47.8 kW

Drive & Traction

crawler

Fuel & Capacities

34.3 gal 129.8 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

7981 lbs 3620 kg

Overview

	2006 - 2007 GCR SeriesAgricultural Crawler tractor GCR Series Agricultural Crawler tractor

Production
Manufacturer	Mitsubishi
Agricultural Crawler tractor

Mitsubishi GCR65 Engine
Mitsubishi 3.3L 4-cyl diesel
Fuel tank	34.3 gal 129.8 L
Engine details ...

Mitsubishi GCR65 Transmission
hydrostatic
Transmission details ...

Mitsubishi GCR65 Power
Engine	64.1 hp 47.8 kW

Mechanical
Drive	crawler
Cab standard with air-conditioning.

Tractor hitch
Rear Type	JISII/JISI
Rear lift	7253 lbs 3289 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Engine RPM	582@2500
	797@2500
	1055@2500

Dimensions & Tracks
Weight	7981 lbs 3620 kg
17.7-inch tracks
Full dimensions and tracks ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 203.3 ci / 3.3 L Diesel

Manufacturer	Mitsubishi S4S-DT
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	203.3 ci 3.3 L
Bore/Stroke	3.70x4.72 inches 94 x 120 mm
Power	64.1 hp 47.8 kW
Rated RPM	2500
Starter volts	12

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Dimensions

Mitsubishi GCR65 Tracks
Width	17.7 inches 44 cm

Dimensions
Length	152.8 inches 388 cm
Width	70.9 inches 180 cm
Height	101.2 inches 257 cm
Weight	7981 lbs 3620 kg
Ground clearance	15.4 inches 39 cm
Gauge	53.2 inches 135 cm

Photos

Mitsubishi GCR65 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi GCR65 based on its 64.1 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi GCR65.

Estimated Continuous Field Runtime: 10.3 hrs

Approximately 10.3 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours