Mitsubishi MT2501

The Mitsubishi MT2501 is a tractor produced by Mitsubishi. It is equipped with a 86.4 ci 1.4 L engine. The listed engine power is Diesel (listed): 24.7 hp / 18.4 kW. Transmission: gear. Operating weight: 2271 to 2480 pounds.

Engine Power

Diesel (listed): 24.7 hp / 18.4 kW

Fuel & Capacities

7.4 gal 28.0 L

Transmission

gear

Operating Weight

2271 to 2480 pounds

Overview

	1982 - 1985 Compact Utility tractor

Production
Manufacturer	Mitsubishi
Compact Utility tractor

Variants
MT2501D	4WD

Mitsubishi MT2501 Engine
Mitsubishi 1.4L 4-cyl diesel
Fuel tank	7.4 gal 28.0 L
Engine details ...

Mitsubishi MT2501 Transmission
12-speed
Transmission details ...

Mitsubishi MT2501 Power
Engine	24.7 hp 18.4 kW

Mechanical
Two- or four-wheel drive
Open operator station.

Tractor hitch
Rear Type	JIS1

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Engine RPM	562@2400
	764@2400
	1020@2400
	1427@2400

Dimensions & Tires
2WD Wheelbase	62 inches 157 cm
4WD Wheelbase	62.8 inches 159 cm
Weight	2271 to 2480 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MT2201 - MT2501 published by Mitsubishi

Engine

Engine Detail — 86.4 ci / 1.4 L Diesel

Manufacturer	Mitsubishi K4E
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	86.4 ci 1.4 L
Power	24.7 hp 18.4 kW
Rated RPM	2400
Starter volts	12

Transmission

Transmission — gear

Transmission	gear
Gears	12 forward and 4 reverse

Dimensions

Mitsubishi MT2501 Tires

Dimensions
2WD Wheelbase	62 inches 157 cm
4WD Wheelbase	62.8 inches 159 cm
Length	115.6 inches 293 cm
Width	51.6 inches 131 cm
2WD Height (exhaust)	78 inches 198 cm
4WD Height (exhaust)	77.6 inches 197 cm
2WD Weight	2271 lbs 1030 kg
4WD Weight	2480 lbs 1124 kg
2WD Ground clearance	12.4 inches 31 cm
4WD Ground clearance	10.2 inches 25 cm
2WD Front tread	38.6/42.5/46.5 inches 98/107/118 cm
4WD Front tread	41.3 inches 104 cm
Rear tread	39.4 to 51.2 inches 100 to 130 cm

Photos

Mitsubishi MT2501

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi MT2501 based on its 24.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi MT2501.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (7.4 gal / 28 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours