Montana P8084C
The Montana P8084C is a tractor produced by Montana. It is equipped with a 195 ci 3.2 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: 20 forward and reverse. Operating weight: 6,676 lbs 3028 kg.
Engine Power
Diesel (listed): 80 hp / 59.7 kW
Fuel & Capacities
26.4 gal
99.9 L
Transmission
20 forward and reverse
Operating Weight
6,676 lbs
3028 kg
Overview
 | 2009
Utility tractorLS built
Utility tractor
LS built |
|---|
Production | |
|---|---|
Distributor | Montana |
Manufacturer | LS |
Utility tractor | |
Built in South Korea | |
Montana P8084C Engine | |
|---|---|
Iveco 3.2L 4-cyl diesel | |
Fuel tank | 26.4 gal
99.9 L |
Engine details ...  | |
Montana P8084C Power | |
|---|---|
Engine | 80 hp
59.7 kW |
PTO (claimed) | 64 hp
47.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Hydraulic brakes | |
Cab with heat and A/C. | |
Hydraulics | |
|---|---|
Pump flow | 11.97 gpm
45.3 lpm |
Steering flow | 7.03 gpm
26.6 lpm |
Tractor hitch | |
|---|---|
Rear lift | 5,511 lbs
2499 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/750/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 86.6 inches
219 cm |
Weight | 6,676 lbs
3028 kg |
Front tire | 11.2-24 |
Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 195 ci / 3.2 L Diesel
Manufacturer | Iveco F5C |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 195 ci
3.2 L |
Power | 80 hp
59.7 kW |
Starter type | electric |
Transmission
Transmission options | |
|---|---|
12-speed synchro shuttle | |
20-speed synchro shuttle with creeper |
Transmission — 12 forward and reverse synchro shuttle
Type | synchro shuttle |
Gears | 12 forward and reverse |
Transmission | |
Type | synchro shuttle with creeper |
Gears | 20 forward and reverse |
Dimensions
Montana P8084C Tires | |
|---|---|
Ag front | 11.2-24 |
Ag rear | 16.9-30 |
Dimensions | |
|---|---|
Wheelbase | 86.6 inches
219 cm |
Length | 157 inches
398 cm |
Width | 77.8 inches
197 cm |
Height (cab) | 102 inches
259 cm |
Weight | 6,676 lbs
3028 kg |
Ballasted weight | 7,293 lbs
3308 kg |
Ground clearance | 16.5 inches
41 cm |
Photos
Montana P8084C tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Montana P8084C based on its 80 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Montana P8084C.
Estimated Continuous Field Runtime: 6.3 hrs
Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Montana P8084C Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Montana P8084C.
Converted Equivalents:
Horsepower (HP)80 hp
Kilowatts (kW)59.7 kW
Metric Horsepower (PS / CV)81.1 PS
Direct Competitor Comparison
Compare Montana P8084C against same-era industry alternatives in the same horsepower class.
Current Model
Montana
Montana P8084C
Engine Power:Diesel (listed): 80 hp / 59.7 kW
★ Baseline Reference
Related models
Montana C6862
- Power:
- 68
- Production years:
- 2006 - 2009
Montana T7074
- Power:
- 70
- Production years:
- 2006 - 2009
Montana P7084C
- Power:
- 72
- Production years:
- 2009 - 2009
Montana P9084C
- Power:
- 88
- Production years:
- 2009 - 2009
Montana I4794
- Power:
- 47
- Production years:
- 2008 - 2011