New Holland Boomer 8N

The New Holland Boomer 8N is a tractor produced by New Holland. It is equipped with a 135.2 ci 2.2 L engine. The listed engine power is Diesel (listed): 50 hp / 37.3 kW. Transmission: infinite forward and reverse. Operating weight: 3760 lbs 1705 kg.

Engine Power

Diesel (listed): 50 hp / 37.3 kW

Fuel & Capacities

13 gal 49.2 L

Transmission

infinite forward and reverse

Operating Weight

3760 lbs 1705 kg

Overview

	2009 - 2011 Boomer SeriesCompact Utility tractor Boomer Series Compact Utility tractor

Production
Manufacturer	New Holland
Compact Utility tractor
Original price was $30,000 in 2009

New Holland Boomer 8N Engine
Shibaura 2.2L 4-cyl diesel
Fuel tank	13 gal 49.2 L
Engine details ...

New Holland Boomer 8N Transmission
continuously variable transmission (CVT)
Transmission details ...

New Holland Boomer 8N Power
Engine	50 hp 37.3 kW
PTO (claimed)	40 hp 29.8 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Integral wet disc brakes
Two-post ROPS. Optional ROPS canopy with windshield.

Hydraulics
Type	open center
Pressure	2500 psi 172.4 bar
Pump flow	10.5 gpm 39.7 lpm
Steering flow	5.1 gpm 19.3 lpm

Tractor hitch
Rear Type	I
Rear lift	2,800 lbs 1270 kg

Power Take-off (PTO)
Rear PTO	independent
Mid PTO	optional

Dimensions & Tires
Wheelbase	73.5 inches 186 cm
Weight	3760 lbs 1705 kg
Front tire	8.0x16
Rear tire	14.9x24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Boomer 8N published in 2009, by New Holland
New Boomer 8N published in 2009, by New Holland

Engine

Engine Detail — 135.2 ci / 2.2 L Diesel

Manufacturer	Shibaura
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	135.2 ci 2.2 L
Bore/Stroke	3.307x3.937 inches 84 x 100 mm
Power	50 hp 37.3 kW
Rated RPM	2800
Starter volts	12
Oil capacity	6.3 qts 6.0 L

Transmission

Transmission — infinite forward and reverse continuously variable transmission (CVT)

Type	continuously variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

New Holland Boomer 8N Tires
Ag front	8.0x16
Ag rear	14.9x24
Lawn/turf front	27x10.5-15
Lawn/turf rear	44x18-20
Industrial front	10x16.5
Industrial rear	17.5x24

Dimensions
Wheelbase	73.5 inches 186 cm
Length	122 inches 309 cm
Width	68.3 inches*Minimum. 173 cm
Height (ROPS)	97.4 inches 247 cm
Weight	3760 lbs 1705 kg
Clearance (drawbar)	12.3 inches 31 cm

Photos

Boomer 8N marketing photo

New Holland Boomer 8N tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland Boomer 8N based on its 50 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland Boomer 8N.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (13 gal / 49.2 L).

Estimated 75% Load Fuel Burn~2.6 gal/hr (9.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours