New Holland L95
The New Holland L95 is a tractor produced by New Holland. It is equipped with a 238 ci 3.9 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: Dual Command. Operating weight: 6834 to 7936 pounds.
Overview
![]() | 1996 - 1999
Utility tractor |
|---|
Series map: L85L9563.4kw70.8kw
Note: the New Holland model L95 is the same as the New Holland 7635. The following data is from the 7635 listing. |
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Built in Italy | |
Original price was $36,400 in 1999 | |
New Holland L95 Engine | |
|---|---|
Iveco 3.9L 4-cyl diesel | |
Fuel tank | 29 gal
109.8 L |
Engine details ... | |
New Holland L95 Transmission | |
|---|---|
24-speed partial power shift | |
Transmission details ... |
New Holland L95 Power | |
|---|---|
Engine | 95 hp
70.8 kW |
PTO (claimed) | 86 hp
64.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Two-post foldable ROPS. Cab optional with air-conditioning. |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 to 3 |
Pump flow | 14.5 gpm
54.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | mechanical lower link draft sensing |
Rear lift (at 24"/610mm) | 6430 lbs
2916 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 92.2 inches
234 cm |
4WD Wheelbase | 91.1 inches
231 cm |
Weight | 6834 to 7936 pounds |
Front tire | 7.50-16 |
Rear tire | 13.6-38 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
ROPS Charging amps | 45 |
Cab Charging amps | 65 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Serie L published in 1996, by New Holland |
Engine
Series map: L85L9563.4kw70.8kw
Note: the New Holland model L95 is the same as the New Holland 7635. The following data is from the 7635 listing. |
Engine Detail — 238 ci / 3.9 L Diesel
Manufacturer | Iveco 8045.25 |
Configuration | turbocharged diesel, 4-cylinder 8-valve, liquid-cooled |
Displacement | 238 ci
3.9 L |
Bore/Stroke | 4.094x4.527 inches
104 x 115 mm |
Power | 95 hp
70.8 kW |
Pre-heating | Thermostart |
Rated RPM | 2500 |
Starter volts | 12 |
Oil capacity | 12.4 qts
11.7 L |
ROPS Coolant capacity | 14.8 qts
14.0 L |
Cab Coolant capacity | 16.9 qts
16.0 L |
Transmission
Series map: L85L9563.4kw70.8kw
Note: the New Holland model L95 is the same as the New Holland 7635. The following data is from the 7635 listing. |
Transmission — Dual Command
Transmission | Dual Command |
Type | partial power shift |
Gears | 24 forward and 12 reverse |
Four gears in three ranges with two-speed power shift and left-hand reverser. The Dual Command provides push-button shifting to lower gear at each speed. | |
Dimensions
Series map: L85L9563.4kw70.8kw
Note: the New Holland model L95 is the same as the New Holland 7635. The following data is from the 7635 listing. |
New Holland L95 Tires | |
|---|---|
Ag front | 7.50-16 |
Ag rear | 13.6-38 |
Dimensions | |
|---|---|
2WD Wheelbase | 92.2 inches
234 cm |
4WD Wheelbase | 91.1 inches
231 cm |
Width | 72.6 inches
184 cm |
Front tread | 56 to 84 inches
142 to 213 cm |
Rear tread | 60 to 84 inches
152 to 213 cm |
New Holland L95 Weight | |
|---|---|
2WD ROPS Shipping | 6834 lbs
3099 kg |
2WD cab Shipping | 7480 lbs
3392 kg |
4WD ROPS Shipping | 7496 lbs
3400 kg |
4WD Cab Shipping | 7936 lbs
3599 kg |
New Holland L95 Height | |
|---|---|
ROPS | 105.5 inches
267 cm |
84 inches (folded)
213 cm | |
Cab | 97.5 inches
247 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland L95 based on its 95 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland L95.
Estimated Continuous Field Runtime: 5.9 hrs
Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (29 gal / 109.8 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
New Holland L95 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland L95.
Converted Equivalents:
Direct Competitor Comparison
Compare New Holland L95 against same-era industry alternatives in the same horsepower class.
New Holland L95
Related models
New Holland T4030
- Power:
- 76
- Production years:
- 2008 - 2011
New Holland T4030F
- Power:
- 76
New Holland T4030V
- Power:
- 76
New Holland TK4030
- Power:
- 76.4
- Production years:
- 2009 - 2017
New Holland TK80
- Power:
- 77
- Production years:
- 2004 - 2009


