New Holland T1030

The New Holland T1030 is a tractor produced by New Holland. It is equipped with a 69 ci 1.1 L engine. The listed engine power is Diesel (gross): 26 hp / 19.4 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1455 lbs 659 kg.

Engine Power

Diesel (gross): 26 hp / 19.4 kW

Fuel & Capacities

7.1 gal 26.9 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

1455 lbs 659 kg

Overview

	2008 T1000 SeriesSub-Compact Utility tractor T1000 Series Sub-Compact Utility tractor

Production
Manufacturer	New Holland (a part of CNH)
Sub-Compact Utility tractor

New Holland T1030 Engine
Shibaura 1.1L 3-cyl diesel
Fuel tank	7.1 gal 26.9 L
Engine details ...

New Holland T1030 Transmission
hydrostatic
Transmission details ...

New Holland T1030 Power
Engine (gross)	26 hp 19.4 kW
PTO (claimed)	19.7 hp 14.7 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Pump flow	3.75 gpm 14.2 lpm
Total flow	5.6 gpm 21.2 lpm
Steering flow	1.85 gpm 7.0 lpm

Tractor hitch
Rear Type	I
Rear lift (at 24"/610mm)	700 lbs 317 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Mid PTO	independent
Mid PTO Type	2200

Dimensions & Tires
Wheelbase	55.1 inches 139 cm
Weight	1455 lbs 659 kg
Front tire	18x8.5-18
Rear tire	26x12-12
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

New Holland 20 and 26 hp T1000 Series Boomer Sub-Compact Tractors published in 2007

Engine

Engine Detail — 69 ci / 1.1 L Diesel

Manufacturer	Shibaura S773L
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled inline
Displacement	69 ci 1.1 L
Bore/Stroke	3.03x3.19 inches 77 x 81 mm
Power (gross)	26 hp 19.4 kW
Rated RPM	3000
Starter volts	12

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Dimensions

New Holland T1030 Tires
Ag front	18x8.5-18
Ag rear	26x12-12

Dimensions
Wheelbase	55.1 inches 139 cm
Length	96.3 inches 244 cm
Width	46.4 inches 117 cm
Height (ROPS)	72.4 inches 183 cm
Shipping weight	1455 lbs 659 kg
Ground clearance	7.3 inches 18 cm

Attachments

60" Mower deck
Type	mid-mount New Holland
Cutting width	60 inches 152 cm

Photos

New Holland T1030 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T1030 based on its 26 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T1030.

Estimated Continuous Field Runtime: 5.3 hrs

Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (7.1 gal / 26.9 L).

Estimated 75% Load Fuel Burn~1.4 gal/hr (5.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours