New Holland T4050V

The New Holland T4050V is a tractor produced by New Holland. It is equipped with a 274 ci 4.5 L engine. The listed engine power is Diesel (gross): 95 hp / 70.8 kW. Transmission: Synchro Command. Drive type: 4x2 2WD. Operating weight: 5307 to 6151(4WD pounds.

Engine Power

Diesel (gross): 95 hp / 70.8 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

19.3 gal 73.1 L

Transmission

Synchro Command

Operating Weight

5307 to 6151(4WD pounds

Overview

Production
Manufacturer	New Holland
Built in Jesi, Italy

Variants
T4050	standard chassis
T4050F	narrow chassis
T4050V	ultra-narrow chassis
TK4050	crawler
TK4050M	mountain crawler (wide)

New Holland T4050V Engine
New Holland 4.5L 4-cyl diesel
Fuel tank	19.3 gal 73.1 L
Engine details ...

New Holland T4050V Power
Engine (gross)	95 hp 70.8 kW
PTO (claimed)	82 hp 61.1 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Platform with ROPS. Cab optional with heat and air-conditioning.

Hydraulics
Type	open center
Pressure	2,755 psi 190.0 bar
Valves	2 to 3
Pump flow	17.2 gpm 65.1 lpm
Steering flow	9.2 gpm 34.8 lpm

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	81.9 inches (2WD) 208 cm
	82.4 inches (4WD) 209 cm
Weight	5307 to 6151(4WD pounds
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	120
Battery CCA	800
Battery volts	12

Engine

Engine Detail — 274 ci / 4.5 L Diesel

Manufacturer	New Holland NEF
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274 ci 4.5 L
Power (gross)	95 hp 70.8 kW
Air cleaner	dual dry element
Rated RPM	2300
Torque	293 lb-ft 397.3 Nm
Torque RPM	1300
Starter volts	12

Transmission

Transmission options
16-speed mechanical shuttle
16-speed power shuttle

Transmission — Synchro Command

Transmission	Synchro Command
Type	mechanical shuttle
Gears	16 forward and reverse

Transmission — Synchro Command

Transmission	Synchro Command
Type	power shuttle
Gears	16 forward and reverse

Dimensions

New Holland T4050V Tires

Dimensions
Wheelbase	81.9 inches (2WD) 208 cm
	82.4 inches (4WD) 209 cm
Width	42.5 inches 107 cm

New Holland T4050V Weight
	5,307 lbs (2WD ROPS) 2407 kg
	5,580 lbs (2WD cab) 2531 kg
	5,878 lbs (4WD ROPS) 2666 kg
	6,151 lbs (4WD cab) 2790 kg

New Holland T4050V Height
Steering wheel	50.8 inches 129 cm
ROPS	88.6 inches 225 cm
Cab	84.6 inches 214 cm

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T4050V based on its 95 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T4050V.

Estimated Continuous Field Runtime: 3.9 hrs

Approximately 3.9 hours of continuous field operation at ~75% rated power on a full tank (19.3 gal / 73.1 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours