New Holland T4.110

The New Holland T4.110 is a tractor produced by New Holland. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (gross): 107 hp / 79.8 kW. Transmission: Dual Command. Operating weight: 6989 to 8157 pounds.

Engine Power

Diesel (gross): 107 hp / 79.8 kW

Fuel & Capacities

30.3 gal 114.7 L

Transmission

Dual Command

Operating Weight

6989 to 8157 pounds

Overview

	2015 - 2017 T4 SeriesUtility tractor T4 Series Utility tractor

Production
Manufacturer	New Holland
Utility tractor

New Holland T4.110 Engine
FPT 3.4L 4-cyl diesel
Fuel tank	30.3 gal 114.7 L
Exhaust fluid (DEF)	2.8 gal 10.6 L
Engine details ...

New Holland T4.110 Power
Engine (gross)	107 hp 79.8 kW
PTO (claimed)	93 hp 69.4 kW
Drawbar (tested)	73.4 hp 54.7 kW
PTO (tested)	96.0 hp 71.6 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
VisionView Cab standard. Two-post ROPS available.

Hydraulics
Type	open center
Valves	2 or 3
Pump flow	16.9 gpm 64.0 lpm

Tractor hitch
Rear Type	II
Control	top-link draft sensing
Rear lift (at ends)	7351 lbs 3334 kg
Rear lift (at 24"/610mm)	4339 lbs 1968 kg
Rear Arms	telescopic link ends
Drawbar	Cat. 2

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540
	540E OptOptional
	1000 OptOptional

Dimensions & Tires
2WD Wheelbase	92.2 inches 234 cm
4WD Wheelbase	90 inches 228 cm
Weight	6989 to 8157 pounds
Front tire	7.50-16
2WD Rear tire	16.9R30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

T4 Series Utility published in 2015, by New Holland
T4 Series published in 2017, by New Holland

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT F5G
Configuration	aftercooled turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.898x4.331 inches 99 x 110 mm
Emissions	Tier IV
Emission control	selectice catalytic reduction with diesel exhaust fluid (DEF) (SCR)
Power (gross)	107 hp 79.8 kW
Fuel system	electronic high-pressure common rail direct injection
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
12-speed power shuttle
24-speed two-speed power shift

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Four synchronized gears in three non-synchronized ranges with mechanical shuttle.

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Four synchronized gears in three non-synchronized ranges with power shuttle.

Transmission — Dual Command

Transmission	Dual Command
Type	two-speed power shift
Gears	24 forward and reverse
Four synchronized gears in three non-synchronized ranges with two-speed power shift and power shuttle.

Dimensions

New Holland T4.110 Tires
2WD Standard tires (ag)	Front: 7.50-16. Rear: 16.9R30
4WD Standard tires (ag)	Front: 11.2R24. Rear: 16.9R30

Dimensions
2WD Wheelbase	92.2 inches 234 cm
4WD Wheelbase	90 inches 228 cm
2WD Length	163.1 inches 414 cm
4WD Length	160.1 inches 406 cm
Width	75.7 inches 192 cm
Height (ROPS)	106.5 inches 270 cm
Height (cab)	102.1 inches 259 cm
Flange rear axle

New Holland T4.110 Weight
2WD ROPS	6989 lbs 3170 kg
4WD ROPS	7672 lbs 3480 kg
2WD Cab	7474 lbs 3390 kg
4WD Cab	8157 lbs 3700 kg
Max capacity	9436 lbs 4280 kg

Tests

OCED Tractor Test 3007
Diesel 12-speed 4WD 4/2016 Link: OCED Tractor Test 3007 file
PTO performance
Max power	96.0 hp 71.6 kW
Fuel use	5.4 gal/hour 20.4 l/hour
Power at rated engine speed	87.6 hp 65.3 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Power at rated PTO speed	95.9 hp 71.5 kW
Fuel use	5.4 gal/hour 20.4 l/hour
Drawbar performance
Max power	73.4 hp 54.7 kW
Fuel use	5.1 gal/hour 19.3 l/hour
Gear 4M used for power test.

Attachments

Attachment overview
New Holland 655TL loader
New Holland 655TL MSL loader

Photos

New Holland T4.110 with 655TL front-end loader.

New Holland T4.110F narrow-profile tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T4.110 based on its 107 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T4.110.

Estimated Continuous Field Runtime: 5.4 hrs

Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (30.3 gal / 114.7 L).

Estimated 75% Load Fuel Burn~5.6 gal/hr (21.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours