New Holland T5060

The New Holland T5060 is a tractor produced by New Holland. It is equipped with a 274 ci 4.5 L engine. The listed engine power is Diesel (gross): 105 hp / 78.3 kW. Transmission: Dual Command. Drive type: 4x2 2WD.

Engine Power

Diesel (gross): 105 hp / 78.3 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

33.5 gal 126.8 L

Transmission

Dual Command

Overview

	2008 - 2013 T5000 SeriesUtility tractor T5000 Series Utility tractor

Production
Manufacturer	New Holland
Utility tractor
Built in Jesi, Italy

New Holland T5060 Engine
New Holland 4.5L 4-cyl diesel
Fuel tank	33.5 gal 126.8 L
Engine details ...

New Holland T5060 Power
Engine (gross)	105 hp 78.3 kW
PTO (claimed)	90 hp 67.1 kW
Drawbar (tested)	76.6 hp 57.1 kW
PTO (tested)	94.4 hp 70.4 kW
Performance test details ...

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Differential lock	mechanical rear standard
	optional electrohydraulic front and rear
Steering	hydrostatic power
Hydraulic wet disc brakes
Flat deck platform with ROPS. Cab optional with heat and air-conditioning.

Hydraulics
Type	open center
Pressure	2,871 psi 198.0 bar
Rear valves	2 to 3 (open or closed center)
Mid valves	0 to 2
Pump flow	16.1 gpm 60.9 lpm
Steering flow	10.4 gpm 39.4 lpm

Tractor hitch
Rear Type	II
Control	mechanical lower-link draft sensing
Rear lift (at 24"/610mm)	5,475 lbs 2483 kg
	6,805 lbs (optional) 3086 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical
	electrohydraulic optional
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2199
	1000@2261

Dimensions & Tires
Wheelbase	92.5 inches 234 cm
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery CCA	960
Battery volts	12

Engine

Engine Detail — 274 ci / 4.5 L Diesel

Manufacturer	New Holland
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274 ci 4.5 L
Emissions	Tier III
Power (gross)	105 hp 78.3 kW
Air cleaner	dual dry element
Pre-heating	grid heater
Rated RPM	2300
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
12-speed power shuttle
20-speed mechanical shuttle
24-speed power shuttle

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse

Transmission — 20 forward and 12 reverse mechanical shuttle

Type	mechanical shuttle
Gears	20 forward and 12 reverse

Transmission — Dual Command

Transmission	Dual Command
Type	power shuttle
Gears	24 forward and reverse

Dimensions

New Holland T5060 Tires

Dimensions
Wheelbase	92.5 inches 234 cm
Length	92.2 inches (2WD) 234 cm
	92.5 inches (4WD) 234 cm
Height (ROPS)	108.9 inches 276 cm
Height (cab)	100.8 inches 256 cm
Flange rear axle	69.7 inch length 1770 mm
Front tread	58.8 to 82.4 inches 149 to 209 cm (2WD)
Front tread	68.9 to 84.7 inches 175 to 215 cm (4WD)

New Holland T5060 Weight
2WD Max front axle	7716 lbs 3499 kg
4WD Max front axle	9920 lbs 4499 kg
Max rear axle	10141 lbs 4599 kg

Tests

OCED Tractor Test 2511
Diesel 12-speed 2WD December 2008 - February 2009, Link: OCED Tractor Test 2511 file
PTO performance
Max power	94.4 hp 70.4 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Power at rated engine speed	93.2 hp 69.5 kW
Fuel use	5.9 gal/hour 22.3 l/hour
Power at rated PTO speed	93.7 hp 69.9 kW
Fuel use	5.9 gal/hour 22.3 l/hour
Drawbar performance
Max power	76.6 hp 57.1 kW
Fuel use	5.8 gal/hour 22.0 l/hour
Gear 3II used for power test.
Max pull	6465 lbs 2932 kg
Gear 2I used for pull test.

Attachments

Attachment overview
New Holland 820 loader
New Holland 830 loader

Photos

New Holland T5060

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T5060 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T5060.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (33.5 gal / 126.8 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours