New Holland T6010

The New Holland T6010 is a tractor produced by New Holland. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Engine Detail — 273.7 ci / 4.5 L (listed): 99.2 hp / 74.0 kW. Transmission: Electro Command creeper. Operating weight: 10450 to 11110 pounds.

Engine Power

Engine Detail — 273.7 ci / 4.5 L (listed): 99.2 hp / 74.0 kW

Fuel & Capacities

46.5 gal 176.0 L

Transmission

Electro Command creeper

Operating Weight

10450 to 11110 pounds

Overview

	2007 - 2012 T6000 Series

Production
Manufacturer	New Holland

Variants

New Holland T6010 Engine
New Holland 4.5L 4-cyl
Fuel tank	46.5 gal 176.0 L
	40.2 gal (SuperSteer axle) 152.2 L
Engine details ...

New Holland T6010 Power
Engine	99.2 hp 74.0 kW

Mechanical
Four-wheel drive
cab with A/C

Hydraulics
Type	fixed displacement
	close center load sensing optional on PLUS (CCLS)
Pressure	2756 psi 190.0 bar
	3046 psi (CCLS) 210.0 bar
Valves	3 (DELTA)
	4 (PLUS)
Pump flow	16.6 gpm (DELTA) 62.8 lpm
	21.1 gpm (PLUS) 79.9 lpm
	29.9 gpm (CCLS) 113.2 lpm

Power Take-off (PTO)
Rear PTO Type	540/540E/1000
Front PTO Type	1000

Dimensions & Tires
Wheelbase	95 inches 241 cm
	95.3 inches (Terraglide axle) 242 cm
	99.2 inches (SuperSteer axle) 251 cm
Weight	10450 to 11110 pounds
Full dimensions and tires ...

Engine

Engine Detail — 273.7 ci / 4.5 L

Manufacturer	New Holland
Configuration	turbocharged, 4-cylinder 8-valve, liquid-cooled
Displacement	273.7 ci 4.5 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Power	99.2 hp 74.0 kW
Rated RPM	2200
Torque	295 lb-ft 400.0 Nm
Torque RPM	1400

Transmission

Transmission options
24-speed
48-speed
16-speed
32-speed

Transmission — Dual Command

Transmission	Dual Command
Gears	24 forward and reverse
Transmission	Dual Command creeper
Gears	48 forward and reverse

Transmission — Electro Command

Transmission	Electro Command
Gears	16 forward and reverse
Transmission	Electro Command creeper
Gears	32 forward and reverse

Dimensions

New Holland T6010 Tires

Dimensions
Wheelbase	95 inches 241 cm
	95.3 inches (Terraglide axle) 242 cm
	99.2 inches (SuperSteer axle) 251 cm
Length	169 inches 429 cm
Width	73.7 inches 187 cm
Height	107.3 inches 272 cm
Ground clearance	16.8 inches 42 cm

New Holland T6010 Weight
	10,450 lbs 4740 kg
	11,070 lbs (SuperSteer axle) 5021 kg
	11,110 lbs (Terraglide axle) 5039 kg

Photos

New Holland T6010 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T6010 based on its 99.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T6010.

Estimated Continuous Field Runtime: 9 hrs

Approximately 9 hours of continuous field operation at ~75% rated power on a full tank (46.5 gal / 176 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours