New Holland T9.670

The New Holland T9.670 is a tractor produced by New Holland. It is equipped with a 787 ci 12.9 L engine. The listed engine power is Diesel (listed): 608 hp / 453.4 kW. Transmission: 16 forward and 2 reverse.

Engine Power

Diesel (listed): 608 hp / 453.4 kW

Fuel & Capacities

480 gal 1816.8 L

Transmission

16 forward and 2 reverse

Overview

	2011 - 2014 T9 SeriesFour-wheel Drive (4WD) tractor T9 Series Four-wheel Drive (4WD) tractor

Production
Manufacturer	New Holland
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA

New Holland T9.670 Engine
FPT 12.9L 6-cyl diesel
Fuel tank	480 gal 1816.8 L
Exhaust fluid (DEF)	62 gal 234.7 L
Engine details ...

New Holland T9.670 Transmission
16-speed full power shift
Transmission details ...

New Holland T9.670 Power
Engine	608 hp 453.4 kW
Drawbar (tested)	490.42 hp 365.7 kW
PTO (tested)	530.73 hp 395.8 kW
Performance test details ...

Mechanical
Four-wheel drive
Hydraulic wet disc brakes
Cab standard.

Hydraulics
Type	closed center load sensing
Pressure	2000 psi 137.9 bar
Rear valves	4 to 8
Pump flow	45 gpm 170.3 lpm
Total flow	42 gpm 159.0 lpm
	57 gpm 215.7 lpm
	98 gpm (MegaFlow) 370.9 lpm
	113 gpm (MegaFlow) 427.7 lpm

Tractor hitch
Rear Type	4N
Rear lift (at 24"/610mm)	20,000 lbs 9072 kg

Power Take-off (PTO)
Rear PTO	optional
Rear PTO Type	1000 (1-3/4)

Dimensions & Tires
Wheelbase	154 inches 391 cm
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	200
Batteries	2
Battery CCA	1000
Battery volts	12

Engine

Engine Detail — 787 ci / 12.9 L Diesel

Manufacturer	FPT
Configuration	wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	787 ci 12.9 L
Bore/Stroke	5.315x5.906 inches 135 x 150 mm
Emissions	Interim Tier 4
Emission control	selective catalytic reduction (SCR)
Power	608 hp 453.4 kW
Maximum Power	669 hp 498.9 kW
Rated RPM	2100
Starter	electric
Starter volts	24
Oil capacity	52 qts 49.2 L
Coolant capacity	84.4 qts 79.9 L

Transmission

Transmission — 16 forward and 2 reverse full power shift

Type	full power shift
Gears	16 forward and 2 reverse

Dimensions

New Holland T9.670 Tires

Dimensions
Wheelbase	154 inches 391 cm
Length	300 inches 762 cm
Width	44 inches (frame) 111 cm
Height	148.5 inches 377 cm
Front axle	4.5 by 120 inches 114 by 3048 mm
Front axle	5 by 120 inches 127 by 3048 mm

New Holland T9.670 Weight
Max capacity	56,000 lbs 25401 kg
Max Drawbar	5,300 lbs 2404 kg
	11,000 lbs (optional) 4989 kg

Tests

OCED Tractor Test 2011A
Diesel 16-speed 4WD November 8 - 30, 2011 Link: OCED Tractor Test 2011A file
PTO performance
Max power	530.73 hp 395.8 kW
Fuel use	27.6 gal/hour 104.5 l/hour
Power at rated engine speed	477.95 hp 356.4 kW
Fuel use	26.3 gal/hour 99.5 l/hour
Power at rated PTO speed	512.41 hp 382.1 kW
Fuel use	27.2 gal/hour 103.0 l/hour
Drawbar performance
Max power	490.42 hp 365.7 kW
Fuel use	29.4 gal/hour 111.3 l/hour
Gear 5 used for power test.
Max pull	48323 lbs 21919 kg
Gear 2 used for pull test.

Photos

New Holland T9.670 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T9.670 based on its 608 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T9.670.

Estimated Continuous Field Runtime: 15.2 hrs

Approximately 15.2 hours of continuous field operation at ~75% rated power on a full tank (480 gal / 1817 L).

Estimated 75% Load Fuel Burn~31.6 gal/hr (119.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours